RT0805FRE07205RL Equivalent & Substitute Parts

Part Overview

The RT0805FRE07205RL is a 205 Ohms ±1% thin film chip resistor in 0805 (2012 Metric) package rated at 0.125W (1/8W) power dissipation. Manufactured by YAGEO under the RT series, this component is actively produced and ROHS3 compliant. Substitute parts are identified to provide alternatives with improved tolerance specifications, higher power ratings, or automotive-grade certifications while maintaining the same resistance value and package footprint.

Substiute Parts

RT0805FRE07205RL

YAGEOIn Stock: 1145RT0805FRE07205RL Datasheet

Current PartRFQ

RT0805BRD07205RL

YAGEOIn Stock: 8418RT0805BRD07205RL Datasheet

UpgradeRFQ

RT0805DRE07205RL

YAGEOIn Stock: 5796RT0805DRE07205RL Datasheet

UpgradeRFQ

5-2176091-3

TE Connectivity Passive ProductIn Stock: 18225-2176091-3 Datasheet

DirectRFQ

ERA-6AEB2050V

Panasonic Electronic ComponentsIn Stock: 6430ERA-6AEB2050V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

• Resistance Value: All substitute parts must be 205 Ohms
• Package Compatibility: All substitute parts must use 0805 (2012 Metric) package
• Composition: All substitute parts must be thin film construction
• Operating Temperature Range: All substitute parts must support -55°C to 155°C
• Tolerance: Substitute parts may have equal or tighter tolerance (±1%, ±0.5%, or ±0.1%)
• Power Rating: Substitute parts may have equal or higher power rating (0.125W or 0.25W)
• Temperature Coefficient: Substitute parts may have equal or lower temperature coefficient (±50ppm/°C or ±25ppm/°C)
• Compliance: All substitute parts must maintain ROHS3 compliance

The following parts meet these substitution criteria:

• RT0805BRD07205RL (YAGEO): Tighter tolerance (±0.1%), lower temperature coefficient (±25ppm/°C)
• RT0805DRE07205RL (YAGEO): Intermediate tolerance (±0.5%), same temperature coefficient
• 5-2176091-3 (TE Connectivity): Higher power rating (0.25W), tighter tolerance (±0.1%), lower temperature coefficient (±25ppm/°C)
• ERA-6AEB2050V (Panasonic): Tighter tolerance (±0.1%), lower temperature coefficient (±25ppm/°C), automotive AEC-Q200 rated

Parameter Comparison

Engineering Selection Recommendations

RT0805BRD07205RL provides improved tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C) while maintaining identical power rating and package. Suitable for applications requiring tighter resistance accuracy.

RT0805DRE07205RL offers intermediate tolerance (±0.5%) with the same temperature coefficient as the original part. Appropriate for applications where moderate tolerance improvement is needed without changing thermal characteristics.

5-2176091-3 combines tighter tolerance (±0.1%), lower temperature coefficient (±25ppm/°C), and higher power rating (0.25W vs 0.125W). Applicable in designs requiring increased thermal headroom or higher dissipation capability. Supplied in Cut Tape packaging rather than Tape & Reel.

ERA-6AEB2050V delivers tighter tolerance (±0.1%), lower temperature coefficient (±25ppm/°C), and automotive AEC-Q200 certification. Required for automotive applications or designs demanding automotive-grade component qualification.

All substitute parts maintain ROHS3 compliance and MSL 1 rating, ensuring compatibility with standard manufacturing and storage conditions.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD07205RL directly replace RT0805FRE07205RL?

A: Yes. Both parts share identical resistance (205 Ω), power rating (0.125W), package (0805), and operating temperature range (-55°C to 155°C). RT0805BRD07205RL provides superior tolerance (±0.1% vs ±1%) and lower temperature coefficient (±25ppm/°C vs ±50ppm/°C), making it a direct upgrade.

Q: What is the difference between RT0805DRE07205RL and RT0805BRD07205RL?

A: RT0805BRD07205RL has tighter tolerance (±0.1%) and lower temperature coefficient (±25ppm/°C). RT0805DRE07205RL has intermediate tolerance (±0.5%) with the same temperature coefficient as the original part (±50ppm/°C). Selection depends on accuracy requirements.

Q: When should 5-2176091-3 be used instead of the original part?

A: Use 5-2176091-3 when the design requires higher power dissipation capability (0.25W vs 0.125W) or when TE Connectivity components are preferred for supply chain reasons. The part also provides tighter tolerance and lower temperature coefficient. Note that this part is supplied in Cut Tape packaging.

Q: Is ERA-6AEB2050V suitable for automotive applications?

A: Yes. ERA-6AEB2050V carries AEC-Q200 automotive qualification and is required for automotive designs. It provides tighter tolerance (±0.1%) and lower temperature coefficient (±25ppm/°C) compared to the original part.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance and MSL 1 rating, ensuring compatibility with standard manufacturing processes and storage requirements.

Q: Can substitute parts with different tolerances be mixed in the same circuit?

A: Substitution decisions depend on circuit design requirements. Parts with tighter tolerance (±0.1%) provide improved accuracy but may have different cost implications. Verify that the selected tolerance meets the circuit's performance specifications.