RT0805FRE0713R3L Equivalent & Substitute Parts

Part Overview

The RT0805FRE0713R3L is a 13.3 Ohms ±1% thin film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This component is actively produced and widely used in precision analog circuits, signal conditioning, and measurement applications where stable resistance values are required. Finding equivalent or substitute parts may be necessary due to supply chain considerations, inventory availability, or specific application requirements that benefit from alternative performance characteristics.

Substiute Parts

RT0805FRE0713R3L

YAGEOIn Stock: 1163RT0805FRE0713R3L Datasheet

Current PartRFQ

3-1625868-9

TE Connectivity Passive ProductIn Stock: 23333-1625868-9 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0805FRE0713R3L is determined by the following critical parameters:

• Resistance Value: Must be 13.3 Ohms (exact match required)
• Package Type: Must be 0805 (2012 Metric) for mechanical and electrical compatibility
• Composition: Thin film construction ensures stable performance characteristics
• Operating Temperature Range: Must support -55°C to 155°C minimum
• RoHS Compliance: ROHS3 Compliant status required for regulatory alignment

The substitute part 3-1625868-9 (TE Connectivity Passive Product) meets all critical substitution criteria. While this part offers enhanced specifications in tolerance (±0.1% vs ±1%) and power rating (0.25W vs 0.125W), these represent improvements that maintain full backward compatibility with the original design requirements.

Parameter Comparison

Engineering Selection Recommendations

Both the RT0805FRE0713R3L and 3-1625868-9 are active production components with ROHS3 compliance and MSL Level 1 rating, making them suitable for standard manufacturing and storage conditions without moisture bake-out requirements.

The 3-1625868-9 substitute provides measurable improvements in tolerance specification (±0.1% vs ±1%) and temperature coefficient performance (±25ppm/°C vs ±50ppm/°C), along with increased power dissipation capability (0.25W vs 0.125W). These enhancements are fully backward compatible with applications designed for the original RT0805FRE0713R3L specification.

Selection between these parts should be based on supply availability, lead time requirements, and cost considerations, as both components satisfy the core electrical and mechanical requirements for 0805 thin film 13.3 Ohm resistor applications.

Frequently Asked Questions (FAQ)

Q: Can the 3-1625868-9 be used as a direct replacement for RT0805FRE0713R3L?

A: Yes. Both components share identical resistance value (13.3 Ohms), package type (0805), composition (thin film), and operating temperature range (-55°C to 155°C). The substitute part meets or exceeds all critical electrical and mechanical parameters.

Q: What are the key differences between these two parts?

A: The primary differences are tolerance (±0.1% vs ±1%), power rating (0.25W vs 0.125W), and temperature coefficient (±25ppm/°C vs ±50ppm/°C). The substitute offers superior performance in all three areas while maintaining identical package dimensions and resistance value.

Q: Are there any height considerations for PCB assembly?

A: Maximum seated heights differ slightly: RT0805FRE0713R3L is 0.024" (0.60mm) while 3-1625868-9 is 0.026" (0.65mm). This 0.002" (0.05mm) difference is negligible for standard PCB assembly and clearance calculations.

Q: Do both parts require moisture bake-out before soldering?

A: No. Both components carry MSL Level 1 (Unlimited) rating, indicating they can be stored and used without moisture sensitivity precautions.

Q: Are both parts RoHS compliant?

A: Yes. Both the RT0805FRE0713R3L and 3-1625868-9 are ROHS3 Compliant, meeting current environmental and regulatory requirements.