RT0402FRE07576RL Equivalent & Substitute Parts

Part Overview

The RT0402FRE07576RL is a 576 Ohm ±1% thin film chip resistor in 0402 (1005 Metric) package manufactured by YAGEO. This surface mount resistor is rated for 0.063W (1/16W) power dissipation and operates across -55°C to 155°C. The part is currently active in production with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are required due to inventory constraints, design upgrades, or application-specific certifications.

Substiute Parts

RT0402FRE07576RL

YAGEOIn Stock: 925RT0402FRE07576RL Datasheet

Current PartRFQ

CPF0402B576RE1

TE Connectivity Passive ProductIn Stock: 5818CPF0402B576RE1 Datasheet

UpgradeRFQ

ERA-2AEB5760X

Panasonic Electronic ComponentsIn Stock: 31548ERA-2AEB5760X Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RT0402FRE07576RL is determined by the following criteria:

Mandatory Matching Parameters:

• Resistance value: 576 Ohms
• Package type: 0402 (1005 Metric)
• Composition: Thin Film
• Termination count: 2
• Packaging format: Tape & Reel (TR)
• Operating temperature range: -55°C to 155°C minimum

Allowable Variations:

• Tolerance: May be equal or tighter (±1% or better)
• Temperature coefficient: May be equal or lower (±50ppm/°C or better)
• Height: Seated maximum up to 0.016" (0.40mm)
• Compliance certifications: May include additional qualifications (AEC-Q200)

Two substitute parts meet these criteria with enhanced specifications.

Parameter Comparison

Engineering Selection Recommendations

CPF0402B576RE1 (TE Connectivity Passive Product): This substitute provides tighter tolerance (±0.1% vs ±1%) and improved temperature coefficient (±25ppm/°C vs ±50ppm/°C) while maintaining identical package dimensions and power rating. ROHS3 compliance is confirmed. Selection is appropriate for applications requiring enhanced precision without automotive qualification requirements.

ERA-2AEB5760X (Panasonic Electronic Components): This substitute offers the same tolerance and temperature coefficient improvements as the TE Connectivity option, with the addition of AEC-Q200 automotive qualification. The seated height is 0.016" (0.40mm) versus 0.014" (0.35mm) for the original part. ROHS3 and REACH compliance are confirmed. Selection is appropriate for automotive applications or designs requiring automotive-grade reliability standards.

Frequently Asked Questions (FAQ)

Q: Can CPF0402B576RE1 be used as a direct replacement for RT0402FRE07576RL? A: Yes. Both parts share identical resistance, power rating, package type, and operating temperature range. The CPF0402B576RE1 provides superior tolerance and temperature coefficient specifications, making it a direct upgrade substitute.

Q: Is ERA-2AEB5760X suitable for non-automotive applications? A: Yes. The AEC-Q200 qualification is an additional certification that does not restrict use in non-automotive circuits. The part meets all electrical and mechanical requirements for standard applications.

Q: What is the impact of the 0.002" (0.05mm) height difference in ERA-2AEB5760X? A: The ERA-2AEB5760X seated height of 0.016" (0.40mm) versus 0.014" (0.35mm) for the original part is within typical PCB assembly tolerances. Verify clearance in high-density layouts or applications with strict height constraints.

Q: Are all three parts available in Tape & Reel packaging? A: Yes. All three parts are supplied in Tape & Reel (TR) format suitable for automated assembly processes.

Q: What tolerance should I specify if the original design uses ±1%? A: The original ±1% tolerance is maintained by RT0402FRE07576RL. Both substitute parts offer ±0.1% tolerance, which is tighter and backward-compatible with designs specifying ±1% or better.