RP104PJ330CS Equivalent & Substitute Parts

Part Overview

The RP104PJ330CS is a 33 Ohm isolated 4-resistor network array manufactured by Samsung Electro-Mechanics. This surface mount component features ±5% tolerance, 62.5mW power per element, and operates across -55°C to 155°C. The part is Active status and RoHS3 compliant, designed for applications requiring precision resistor networks in compact 0804 package form factor. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the allowed parameter range.

Substiute Parts

RP104PJ330CS

Samsung Electro-MechanicsIn Stock: 1155RP104PJ330CS Datasheet

Current PartRFQ

741X083330JP

CTS Resistor ProductsIn Stock: 437878741X083330JP Datasheet

DirectRFQ

RAVF104DJT33R0

Stackpole Electronics IncIn Stock: 33239RAVF104DJT33R0 Datasheet

DirectRFQ

YC124-JR-0733RL

YAGEOIn Stock: 15819YC124-JR-0733RL Datasheet

DirectRFQ

YC124-FR-0733RL

YAGEOIn Stock: 262204YC124-FR-0733RL Datasheet

UpgradeRFQ

EXB-28V330JX

Panasonic Electronic ComponentsIn Stock: 999320EXB-28V330JX Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict adherence to the following criteria:

Fixed Parameters (No Deviation Allowed):

• Resistance value: 33 Ohm
• Number of resistors: 4
• Circuit type: Isolated
• Package / Case: 0804, Convex, Long Side Terminals
• Number of pins: 8
• Mounting type: Surface Mount
• Moisture sensitivity level: 1 (Unlimited)

Allowed Parameter Ranges:

• Tolerance: ±5% or better (±1% acceptable as upgrade)
• Power per element: 62.5mW or greater
• Temperature coefficient: ±200ppm/°C (fixed)
• Operating temperature: -55°C to 155°C minimum (higher upper limit acceptable)
• RoHS status: ROHS3 Compliant (required)

Packaging Format: Tape & Reel (TR) or Cut Tape (CT) & Digi-Reel® formats are interchangeable with the original -packaging specification.

All substitute parts listed maintain electrical isolation, identical footprint dimensions (2.00mm x 1.00mm), and compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

Direct Substitutes (Electrically and Mechanically Equivalent):

RAVF104DJT33R0 (Stackpole Electronics Inc) and YC124-JR-0733RL (YAGEO) are direct substitutes with identical electrical specifications to RP104PJ330CS. Both maintain ±5% tolerance, 62.5mW power per element, and -55°C to 155°C operating range. RAVF104DJT33R0 carries AEC-Q200 automotive qualification. YC124-JR-0733RL is qualified for DDRAM and SDRAM applications with AEC-Q200 certification.

741X083330JP (CTS Resistor Products) is a direct substitute with equivalent electrical performance. Operating temperature upper limit is 125°C, which is within acceptable range for most applications not requiring the full 155°C specification. Power per element is 63mW, exceeding the 62.5mW requirement.

Upgrade Substitute (Enhanced Tolerance):

YC124-FR-0733RL (YAGEO) provides ±1% tolerance compared to the ±5% specification of RP104PJ330CS. This represents improved precision while maintaining all other electrical and mechanical parameters. Selection is appropriate when tighter tolerance requirements exist.

Similar Substitute (Temperature Range Consideration):

EXB-28V330JX (Panasonic Electronic Components) operates to 125°C maximum, compared to 155°C for RP104PJ330CS. Selection requires confirmation that application operating temperature does not exceed 125°C. All other electrical specifications are equivalent.

All substitute parts are Active status, RoHS3 compliant, and maintain MSL 1 (Unlimited) moisture sensitivity rating.

Frequently Asked Questions (FAQ)

Q: Can YC124-FR-0733RL replace RP104PJ330CS in all applications?

A: YC124-FR-0733RL is electrically and mechanically compatible. The ±1% tolerance is superior to the ±5% specification of RP104PJ330CS. Selection depends on application requirements for tolerance precision and operating temperature range (-55°C to 155°C is supported).

Q: What is the difference between 741X083330JP and RAVF104DJT33R0?

A: Both are direct substitutes with 33 Ohm ±5% specifications. 741X083330JP operates to 125°C maximum with 63mW power per element. RAVF104DJT33R0 operates to 155°C with 62.5mW power per element and carries AEC-Q200 automotive qualification. Selection depends on temperature range and automotive qualification requirements.

Q: Is EXB-28V330JX suitable for high-temperature applications?

A: EXB-28V330JX operates to 125°C maximum. If the application requires operation above 125°C, this part is not suitable. RP104PJ330CS, RAVF104DJT33R0, and YC124-JR-0733RL support -55°C to 155°C range.

Q: Do all substitute parts use the same 0804 package footprint?

A: All listed parts use 0804 package with Convex, Long Side Terminals configuration. Physical dimensions are 2.00mm x 1.00mm. Height variations exist: RP104PJ330CS and EXB-28V330JX are 0.018" (0.45mm); RAVF104DJT33R0 is 0.020" (0.50mm); 741X083330JP and YC124 series are 0.022" (0.55mm). These height differences are within standard PCB assembly tolerances.

Q: Are all parts RoHS3 compliant?

A: All listed parts are RoHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating. All carry REACH Unaffected status and EAR99 ECCN classification.

Q: What packaging formats are available?

A: RP104PJ330CS is supplied in standard packaging. Substitute parts are available in Tape & Reel (TR) or Cut Tape (CT) & Digi-Reel® formats. Format selection depends on procurement and assembly requirements.