RN732ATTD2000B05 Equivalent & Substitute Parts

Part Overview

The RN732ATTD2000B05 is a 200 Ohms ±0.1% thin film chip resistor manufactured by KOA Speer Electronics, Inc., rated at 0.1W (1/10W) in 0805 (2012 Metric) package format. This component features moisture-resistant construction with a temperature coefficient of ±5ppm/°C and operates across -55°C to 155°C. The part is classified as obsolete, necessitating identification of active equivalent and substitute components that maintain functional compatibility while offering improved availability and enhanced specifications.

Key Parameters

Parameter	Value
Resistance	200 Ohms
Tolerance	±0.1%
Power Rating	0.1W (1/10W)
Package / Case	0805 (2012 Metric)
Composition	Thin Film
Temperature Coefficient	±5ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Moisture Sensitivity Level	1 (Unlimited)
RoHS Status	ROHS3 Compliant
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution of the RN732ATTD2000B05 is determined by strict adherence to the following electrical and mechanical parameters:

Critical Substitution Parameters:

Resistance value: 200 Ohms (exact match required)
Package format: 0805 (2012 Metric) (exact match required)
Tolerance: ±0.1% or tighter (equal or superior tolerance acceptable)
Composition: Thin Film (exact match required)
Temperature Coefficient: ±5ppm/°C (exact match required)
Operating Temperature Range: -55°C to 155°C minimum (equal or superior range acceptable)
Moisture Sensitivity Level: 1 (Unlimited) (exact match required)
RoHS Compliance: ROHS3 Compliant (exact match required)

Power Rating Consideration: The original part is rated at 0.1W (1/10W). Substitute parts rated at 0.125W (1/8W) or higher are electrically compatible, as higher power ratings provide equal or superior thermal performance in the same package footprint.

Acceptable Enhancements:

Tighter tolerance specifications (±0.02%, ±0.05%, ±0.01%)
Higher power ratings (0.125W or greater)
Additional features such as automotive AEC-Q200 certification or anti-sulfur construction
Active product status (preferred over obsolete)

All substitute parts listed maintain identical mechanical dimensions, electrical characteristics, and compliance certifications while offering improved availability and enhanced specifications.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Operating Temp	Product Status	AEC-Q200	Inventory
RN732ATTD2000B05	KOA Speer	200 Ω	±0.1%	0.1	0805	±5ppm/°C	-55~155°C	Obsolete	No	918
RN73R2ATTD2000B05	KOA Speer	200 Ω	±0.1%	0.125	0805	±5ppm/°C	-55~155°C	Active	Yes	670
RG2012V-201-B-T5	Susumu	200 Ω	±0.1%	0.125	0805	±5ppm/°C	-55~155°C	Active	Yes	1140
RG2012V-201-P-T1	Susumu	200 Ω	±0.02%	0.125	0805	±5ppm/°C	-55~155°C	Active	Yes	973
RG2012V-201-W-T1	Susumu	200 Ω	±0.05%	0.125	0805	±5ppm/°C	-55~155°C	Active	Yes	890
RG2012V-201-W-T5	Susumu	200 Ω	±0.05%	0.125	0805	±5ppm/°C	-55~155°C	Active	Yes	1086
RNCF0805TKY200R	Stackpole Electronics	200 Ω	±0.01%	0.125	0805	±5ppm/°C	-55~155°C	Active	Yes	3225
TNPU0805200RAZEN00	Vishay Dale	200 Ω	±0.05%	0.125	0805	±5ppm/°C	-55~125°C	Active	Yes	753
TNPU0805200RBZEN00	Vishay Dale	200 Ω	±0.1%	0.125	0805	±5ppm/°C	-55~125°C	Active	Yes	1865

Engineering Selection Recommendations

Direct Replacement (Equivalent Tolerance):

RN73R2ATTD2000B05 from KOA Speer Electronics serves as the primary direct substitute. This part maintains identical electrical specifications (200 Ohms ±0.1%) and mechanical compatibility while offering active product status. The increased power rating (0.125W vs. 0.1W) provides thermal margin without affecting circuit performance. AEC-Q200 automotive certification and moisture-resistant construction are included.

Enhanced Tolerance Alternatives:

For applications requiring superior tolerance performance, three Susumu RG2012V series options are available:

RG2012V-201-P-T1 (±0.02% tolerance)
RG2012V-201-W-T1 (±0.05% tolerance)
RG2012V-201-W-T5 (±0.05% tolerance)

All three maintain 0.125W power rating, AEC-Q200 certification, and anti-sulfur construction. Selection between these variants depends on tolerance requirements and packaging preference (T1 vs. T5 tape specifications).

Premium Specification Option:

RNCF0805TKY200R from Stackpole Electronics offers the tightest tolerance (±0.01%) with highest inventory availability (3225 units). This component is suitable for precision measurement and calibration applications requiring superior tolerance performance.

Alternative with Extended Temperature Margin:

TNPU0805200RBZEN00 from Vishay Dale provides ±0.1% tolerance matching the original specification with anti-sulfur and moisture-resistant features. Operating temperature range is -55°C to 125°C, which is acceptable for most applications but does not extend to the original 155°C maximum.

Product Status Consideration:

All recommended substitutes carry active product status, ensuring long-term availability and supply chain stability compared to the obsolete RN732ATTD2000B05.

Frequently Asked Questions (FAQ)

Q: Can I use a 0.125W (1/8W) rated resistor in place of the 0.1W (1/10W) original part?

A: Yes. The 0.125W rating provides equal or superior thermal performance in the identical 0805 package footprint. Higher power ratings do not negatively affect circuit operation; they only provide additional thermal margin.

Q: What does tolerance rating mean, and why does it matter for substitution?

A: Tolerance specifies the maximum deviation from the nominal resistance value. The original part is ±0.1%, meaning the actual resistance can vary by 0.1% from 200 Ohms. Substitute parts with equal or tighter tolerance (±0.05%, ±0.02%, ±0.01%) are fully compatible and provide superior accuracy. Tighter tolerance does not create compatibility issues.

Q: Are all substitute parts mechanically identical to the original?

A: Yes. All listed substitutes use the 0805 (2012 Metric) package format with identical footprint dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm). Physical mounting and PCB layout compatibility is maintained across all options.

Q: What is AEC-Q200 certification, and is it required?

A: AEC-Q200 is an automotive qualification standard. The original RN732ATTD2000B05 does not carry this certification. All active substitute parts listed include AEC-Q200 certification, which indicates enhanced reliability testing and suitability for automotive applications. This certification is beneficial but not required for non-automotive applications.

Q: Why do some substitutes have a lower maximum operating temperature (125°C vs. 155°C)?

A: The Vishay Dale TNPU series (TNPU0805200RAZEN00 and TNPU0805200RBZEN00) specify -55°C to 125°C operating range, compared to -55°C to 155°C for other options. This difference is acceptable for most applications. Selection depends on whether your circuit requires operation at temperatures above 125°C.

Q: What is the difference between T1 and T5 tape specifications?

A: T1 and T5 refer to different tape reel configurations for automated assembly. Both are standard packaging formats. Selection between T1 and T5 depends on your assembly equipment compatibility, not electrical performance.

Q: Can I substitute a part with tighter tolerance if my circuit only requires ±0.1%?

A: Yes. Tighter tolerance is always acceptable as a substitute. A ±0.01% part can be used in any application requiring ±0.1% or looser tolerance without any negative effects.

Q: What does "Moisture Resistant" mean?

A: Moisture resistance indicates the component has enhanced protection against moisture absorption and environmental degradation. The original part and most substitutes include this feature, which is beneficial for reliability in humid or harsh environments.

Q: Which substitute offers the best overall availability?

A: RNCF0805TKY200R from Stackpole Electronics has the highest inventory (3225 units) and offers the tightest tolerance (±0.01%) with active product status and AEC-Q200 certification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message