RN60D2000FBSL Equivalent & Substitute Parts

Part Overview

The RN60D2000FBSL is a 200 Ohm ±1% metal film axial resistor rated at 0.25W (1/4W) manufactured by Vishay Dale. This component is part of the military-grade RN60 series, featuring flame retardant coating, moisture resistance, and safety certification per MIL-R-10509/1. The part is currently active in production with 1112 units in stock. Substitute parts are necessary to accommodate different packaging requirements, improved tolerance specifications, or enhanced temperature coefficient performance while maintaining core electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Resistance	200 Ohms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Composition	Metal Film
Package Type	Axial
Operating Temperature Range	-65°C to 175°C
Series Classification	Military, MIL-R-10509/1, RN60
Features	Flame Retardant Coating, Military, Moisture Resistant, Safety

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict adherence to the following parameters: resistance value (200 Ohms), power rating (0.25W), package type (Axial), operating temperature range (-65°C to 175°C), and series classification (RN60 military grade). All substitute parts maintain these core specifications. Variations occur in three categories:

Packaging Format: The main part RN60D2000FBSL is supplied in Bulk packaging. Direct substitutes RN60D2000FRE6 and RN60D2000FB14 are available in Cut Tape (CT) and Bulk formats respectively, allowing flexibility in procurement and assembly workflows.

Tolerance and Temperature Coefficient: Upgrade options RN60C2000FB14 and RN60C2000FRE6 reduce temperature coefficient from ±100ppm/°C to ±50ppm/°C while maintaining ±1% tolerance. The premium upgrade RN60E2000BB14 offers ±0.1% tolerance with ±25ppm/°C temperature coefficient, suitable for precision applications requiring tighter performance specifications.

All substitute parts are manufactured by Vishay Dale, maintain active product status, and comply with identical regulatory classifications (RoHS non-compliant, REACH Affected, ECCN EAR99, HTSUS 8533.21.0090).

Parameter Comparison

Part Number	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Packaging	Inventory (Pcs)	Substitution Type
RN60D2000FBSL	200 Ω	±1%	0.25	±100	Bulk	1112	Main Part
RN60D2000FRE6	200 Ω	±1%	0.25	±100	Cut Tape (CT)	1586	Direct Equivalent
RN60D2000FB14	200 Ω	±1%	0.25	±100	Bulk	1689	Parametric Equivalent
RN60C2000FB14	200 Ω	±1%	0.25	±50	Bulk	1671	Upgrade
RN60C2000FRE6	200 Ω	±1%	0.25	±50	Cut Tape (CT)	6452	Upgrade
RN60E2000BB14	200 Ω	±0.1%	0.25	±25	Bulk	1601	Premium Upgrade

Engineering Selection Recommendations

Direct Substitution (Identical Electrical Performance): RN60D2000FRE6 and RN60D2000FB14 are electrically and mechanically identical to the main part RN60D2000FBSL. Selection between these options depends solely on packaging requirements: Cut Tape (CT) format for automated assembly processes or Bulk format for manual assembly and kit applications.

Upgraded Performance (Improved Stability): RN60C2000FB14 and RN60C2000FRE6 provide enhanced temperature stability with ±50ppm/°C coefficient while maintaining ±1% tolerance. These are suitable for applications where temperature-induced drift must be minimized. Packaging selection follows the same criteria as direct substitutes.

Premium Precision Grade (Tightest Tolerance): RN60E2000BB14 delivers ±0.1% tolerance with ±25ppm/°C temperature coefficient. This part is specified for precision measurement circuits, calibration standards, and applications requiring superior long-term stability. All substitute parts maintain active product status and identical regulatory compliance with the main part.

Frequently Asked Questions (FAQ)

Q: Can RN60D2000FRE6 replace RN60D2000FBSL in existing designs? A: Yes. RN60D2000FRE6 is a direct electrical and mechanical equivalent with identical resistance, tolerance, power rating, and temperature coefficient. The only difference is packaging format (Cut Tape versus Bulk). No circuit redesign is required.

Q: What is the difference between the upgrade parts and the main part? A: Upgrade parts RN60C2000FB14 and RN60C2000FRE6 reduce temperature coefficient from ±100ppm/°C to ±50ppm/°C, improving stability across the operating temperature range. RN60E2000BB14 further improves tolerance to ±0.1% with ±25ppm/°C coefficient. All maintain identical resistance, power rating, and package dimensions.

Q: Are all substitute parts military-grade components? A: Yes. All substitute parts are classified as military-grade resistors within the RN60 series, comply with MIL-R-10509/1, and feature identical flame retardant coating, moisture resistance, and safety certifications.

Q: Which packaging format should I select? A: Cut Tape (CT) format is standard for automated pick-and-place assembly. Bulk packaging is used for manual assembly, kit distribution, or applications where tape packaging is not required. Electrical performance is identical between formats.

Q: Can I use RN60E2000BB14 as a direct replacement for RN60D2000FBSL? A: Yes, with the understanding that RN60E2000BB14 provides superior performance characteristics. The tighter ±0.1% tolerance and improved ±25ppm/°C temperature coefficient make it suitable for any application requiring the original part, with enhanced precision benefits.

Q: Are there any compliance or regulatory differences between substitute parts? A: No. All substitute parts share identical RoHS status (non-compliant), REACH status (Affected), ECCN classification (EAR99), and HTSUS code (8533.21.0090) with the main part.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message