RN60D1822FRE6 Equivalent & Substitute Parts

Part Overview

The RN60D1822FRE6 is a 18.2 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN60 series (MIL-R-10509/1), this component features flame retardant coating, moisture resistance, and safety-rated construction suitable for military and high-reliability applications. The part is currently active in production with 777 units in stock. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications, enabling procurement flexibility across different supply channels and inventory conditions.

Substiute Parts

RN60D1822FRE6

Vishay DaleIn Stock: 865RN60D1822FRE6 Datasheet

Current PartRFQ

RN60D1822FB14

Vishay DaleIn Stock: 967RN60D1822FB14 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution between RN60D1822FRE6 and RN60D1822FB14 is valid based on the following criteria:

Identical Electrical Parameters:

• Resistance value: 18.2 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -65°C to 175°C

Identical Mechanical Parameters:

• Package type: Axial
• Physical dimensions: 0.145" Dia x 0.344" L (3.68mm x 8.74mm)
• Number of terminations: 2

Identical Material & Construction:

• Composition: Metal Film
• Features: Flame Retardant Coating, Military, Moisture Resistant, Safety
• Series: Military, MIL-R-10509/1, RN60

Difference:

• Packaging format only: RN60D1822FRE6 supplied in Tape & Reel (TR); RN60D1822FB14 supplied in Bulk

Both parts share identical base product number (RN60) and maintain full compliance with military specifications and material certifications.

Parameter Comparison

Engineering Selection Recommendations

Both RN60D1822FRE6 and RN60D1822FB14 are active production components from Vishay Dale with identical electrical, mechanical, and material specifications. Selection between these parts is determined by packaging and procurement requirements:

RN60D1822FRE6 (Tape & Reel): Suitable for automated assembly processes and high-volume production runs where tape-and-reel packaging provides handling efficiency and component counting accuracy.

RN60D1822FB14 (Bulk): Suitable for manual assembly, prototyping, repair operations, and applications where bulk packaging reduces per-unit cost for smaller quantities.

Both parts maintain full compliance with MIL-R-10509/1 military specifications, RoHS non-compliant status, and REACH affected designation. Electrical performance, temperature stability, and reliability characteristics are identical across both packaging formats.

Frequently Asked Questions (FAQ)

Q: Can RN60D1822FB14 (Bulk) be used as a direct replacement for RN60D1822FRE6 (Tape & Reel)?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format. Substitution is valid for any application where the component specifications match the circuit requirements.

Q: What determines whether these parts are interchangeable?

A: Interchangeability is based on matching resistance value (18.2 kOhms), tolerance (±1%), power rating (0.25W), temperature coefficient (±100ppm/°C), operating temperature range (-65°C to 175°C), axial package type, and physical dimensions (0.145" Dia x 0.344" L). Both parts meet these criteria identically.

Q: Does packaging format affect electrical performance?

A: No. Tape & Reel and Bulk packaging formats contain identical components. Packaging affects only handling, storage, and assembly process compatibility, not electrical or thermal characteristics.

Q: Are both parts suitable for military applications?

A: Yes. Both RN60D1822FRE6 and RN60D1822FB14 are manufactured to MIL-R-10509/1 specifications with military-grade construction, flame retardant coating, and moisture resistance.

Q: What is the difference in inventory availability?

A: RN60D1822FRE6 (Tape & Reel) has 777 units in stock. RN60D1822FB14 (Bulk) has 935 units in stock. Availability may vary based on current procurement cycles.

Q: Can these parts be mixed in the same assembly?

A: Yes. Since electrical and mechanical specifications are identical, both packaging formats can be used within the same design or production batch without affecting circuit performance or reliability.