RN60C1003CRSL Equivalent & Substitute Parts

Part Overview

The RN60C1003CRSL is a 100 kOhms ±0.25% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. Manufactured by Vishay Dale under the military-grade RN60 series (MIL-R-10509/1), this component features flame retardant coating, moisture resistance, and safety certification suitable for military applications. The part is currently active in production with 903 units in stock.

Substitute parts may be required due to packaging availability, tolerance specifications, or inventory constraints across different distribution channels.

Substiute Parts

RN60C1003CRSL

Vishay DaleIn Stock: 980RN60C1003CRSL Datasheet

Current PartRFQ

RN60C1003BB14

Vishay DaleIn Stock: 1128RN60C1003BB14 Datasheet

UpgradeRFQ

RN60C1003BRE6

Vishay DaleIn Stock: 1914RN60C1003BRE6 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RN60C1003CRSL is determined by the following critical parameters:

• Resistance Value: Must be 100 kOhms (exact match required)
• Power Rating: Must be 0.25W (1/4W) minimum
• Package Type: Must be Axial configuration
• Composition: Must be Metal Film
• Temperature Coefficient: Must be ±50ppm/°C or better
• Operating Temperature Range: Must support -65°C to 175°C
• Series Compliance: Must belong to RN60 military series (MIL-R-10509/1)
• Features: Must include Flame Retardant Coating, Military grade, Moisture Resistant, and Safety certification

The two identified substitute parts (RN60C1003BB14 and RN60C1003BRE6) meet all critical parameters. The primary difference is tolerance specification (±0.1% versus ±0.25%) and packaging format (Bulk, Cut Tape, or Tape & Reel), which do not affect electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain active production status and identical military-grade specifications. Selection between RN60C1003CRSL and its substitutes should be based on:

Tolerance Requirements: RN60C1003BB14 and RN60C1003BRE6 offer ±0.1% tolerance, which is tighter than the main part's ±0.25%. Applications requiring the original ±0.25% tolerance specification can use any of the three parts without performance degradation. Applications with tighter tolerance requirements benefit from the substitute parts.

Packaging Considerations: RN60C1003CRSL is supplied in Tape & Reel format. RN60C1003BB14 is available in Bulk packaging, while RN60C1003BRE6 is supplied in Cut Tape format. Packaging selection depends on assembly process requirements and inventory management practices.

Compliance and Certifications: All three parts share identical RoHS non-compliance status and REACH compliance status. No compliance advantage exists between parts.

Inventory Availability: RN60C1003BRE6 has the highest inventory level (1899 units), followed by RN60C1003BB14 (1094 units) and RN60C1003CRSL (903 units).

Frequently Asked Questions (FAQ)

Q: Can RN60C1003BB14 or RN60C1003BRE6 be used as direct replacements for RN60C1003CRSL?

A: Yes. Both substitute parts meet all critical electrical and mechanical parameters. The tighter ±0.1% tolerance of the substitutes is compatible with applications designed for ±0.25% tolerance. Axial package dimensions are identical across all three parts.

Q: What is the difference between Tape & Reel, Cut Tape, and Bulk packaging?

A: Tape & Reel (TR) supplies components on continuous carrier tape wound on reels for automated assembly. Cut Tape (CT) provides the same carrier tape in shorter segments. Bulk packaging supplies loose components. All three formats contain identical components; packaging format affects only handling and assembly process compatibility.

Q: Are there any electrical performance differences between the main part and substitutes?

A: No. Resistance value, power rating, temperature coefficient, and operating temperature range are identical. The only electrical difference is tolerance specification, where substitutes offer improved accuracy (±0.1% versus ±0.25%).

Q: Do all parts comply with military specifications?

A: Yes. All three parts are manufactured to MIL-R-10509/1 specification and belong to the RN60 military-grade series. Military features including flame retardant coating, moisture resistance, and safety certification are present on all parts.

Q: Which substitute should be selected for new designs?

A: Selection depends on packaging requirements and tolerance specifications. For automated assembly requiring tape format, RN60C1003BRE6 (Cut Tape) is suitable. For manual assembly or bulk procurement, RN60C1003BB14 (Bulk) is appropriate. Both offer superior tolerance performance compared to the main part.