RLR07C2000GSB14 Equivalent & Substitute Parts

Part Overview

The RLR07C2000GSB14 is a 200 Ohm ±2% metal film axial resistor rated at 0.25W (1/4W) manufactured by Vishay Dale. This component is part of the military-grade RLR07 series, compliant with MIL-PRF-39017/01 specifications. The resistor features moisture resistance and weldability, making it suitable for military and aerospace applications requiring high reliability. The part is currently active in production with 1030 units in stock.

Substitute parts are identified when equivalent electrical performance can be maintained while meeting or exceeding the original specifications within the allowed parameter tolerances for this resistor category.

Substiute Parts

RLR07C2000GSB14

Vishay DaleIn Stock: 1061RLR07C2000GSB14 Datasheet

Current PartRFQ

RLR07C2000FSB14

Vishay DaleIn Stock: 1352RLR07C2000FSB14 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the RLR07C2000GSB14 is determined by the following critical parameters:

• Resistance Value: Must be 200 Ohms
• Power Rating: Must be 0.25W (1/4W)
• Package Type: Must be Axial
• Composition: Must be Metal Film
• Series Compliance: Must be RLR07 series, MIL-PRF-39017/01
• Operating Temperature Range: Must support -65°C to 150°C
• Temperature Coefficient: Must be ±100ppm/°C

The RLR07C2000FSB14 qualifies as a substitute because it maintains all critical electrical and mechanical parameters while offering improved tolerance (±1% versus ±2%), which represents an upgrade in precision without compromising compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the RLR07C2000GSB14 and RLR07C2000FSB14 are active production components from Vishay Dale with identical military qualification, compliance status, and reliability ratings. Selection between these parts should be based on tolerance requirements for the specific application.

The RLR07C2000GSB14 with ±2% tolerance is suitable for applications where standard precision is acceptable. The RLR07C2000FSB14 with ±1% tolerance provides enhanced precision for circuits requiring tighter resistance values. Both parts maintain identical thermal performance, failure rates, and environmental specifications.

Compliance considerations are equivalent between both parts: both are RoHS non-compliant, REACH Affected, and classified as EAR99 for export control purposes.

Frequently Asked Questions (FAQ)

Q: Can RLR07C2000FSB14 be used as a direct replacement for RLR07C2000GSB14?

A: Yes. The RLR07C2000FSB14 maintains all critical electrical and mechanical parameters required for substitution, including resistance value, power rating, package type, operating temperature range, and military series compliance. The improved tolerance specification does not create compatibility issues.

Q: What is the primary difference between these two parts?

A: The tolerance specification differs: RLR07C2000GSB14 has ±2% tolerance, while RLR07C2000FSB14 has ±1% tolerance. All other electrical and mechanical characteristics are identical.

Q: Are both parts available in the same package configuration?

A: Yes. Both parts use the identical axial package with 0.090" diameter and 0.250" length (2.29mm x 6.35mm).

Q: Do these parts have the same temperature performance?

A: Yes. Both parts have identical temperature coefficient (±100ppm/°C) and operating temperature range (-65°C to 150°C).

Q: Are there any compliance differences between these parts?

A: No. Both parts share identical RoHS status (non-compliant), REACH status (Affected), and ECCN classification (EAR99).