Equivalent & Substitute Parts for RLR05C1001FSR36

Part Overview

The RLR05C1001FSR36 is a 1 kOhms ±1% metal film axial resistor rated at 0.125W (1/8W) manufactured by Vishay Dale. This component is part of the Military MIL-PRF-39017/05 RLR05 series and features moisture-resistant, weldable construction suitable for through-hole applications. The part is currently active in production with 941 pieces in stock. Substitute parts are identified when packaging format differs while maintaining identical electrical and mechanical specifications, enabling procurement flexibility and supply chain optimization.

Substiute Parts

RLR05C1001FSR36

Vishay DaleIn Stock: 960RLR05C1001FSR36 Datasheet

Current PartRFQ

RLR05C1001FSRE6

Vishay DaleIn Stock: 1627RLR05C1001FSRE6 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of RLR05C1001FSR36 is determined by equivalence in the following critical parameters: resistance value (1 kOhms), tolerance (±1%), power rating (0.125W), composition (metal film), temperature coefficient (±100ppm/°C), operating temperature range (-65°C to 150°C), package type (axial), physical dimensions (0.066" Dia x 0.150" L), series classification (Military MIL-PRF-39017/05 RLR05), and failure rate (S 0.001%). The substitute part RLR05C1001FSRE6 maintains all these parameters identically. The only difference is the packaging format: the main part is supplied in Tape & Reel (TR) configuration, while the substitute is supplied in Cut Tape (CT) configuration. Both formats contain the same component with identical electrical and mechanical characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both RLR05C1001FSR36 and RLR05C1001FSRE6 are active production components from Vishay Dale with identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements and procurement logistics. The Tape & Reel format (RLR05C1001FSR36) is suitable for automated assembly processes, while the Cut Tape format (RLR05C1001FSRE6) provides flexibility for manual assembly or smaller batch operations. Both parts maintain RoHS non-compliant and REACH Affected status, requiring compliance verification within the end-use application context. The military-grade MIL-PRF-39017/05 classification and S-level failure rate ensure reliability for demanding applications.

Frequently Asked Questions (FAQ)

Q: Can RLR05C1001FSRE6 be used as a direct replacement for RLR05C1001FSR36?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format: Tape & Reel versus Cut Tape. Component performance, reliability, and specifications are equivalent.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging supplies components on continuous carrier tape wound on a reel, optimized for automated pick-and-place assembly. Cut Tape packaging supplies the same components on tape segments, suitable for manual assembly or lower-volume applications. The resistor itself is identical in both formats.

Q: Are there any electrical performance differences between these substitute parts?

A: No. Both parts share identical resistance (1 kOhms), tolerance (±1%), power rating (0.125W), temperature coefficient (±100ppm/°C), and operating temperature range (-65°C to 150°C).

Q: Which part should be selected for high-volume automated assembly?

A: RLR05C1001FSR36 in Tape & Reel format is optimized for automated assembly processes with pick-and-place equipment.

Q: Which part should be selected for manual assembly or prototyping?

A: RLR05C1001FSRE6 in Cut Tape format provides flexibility for manual assembly and smaller batch operations.

Q: Do both parts meet military specifications?

A: Yes. Both parts are classified as Military MIL-PRF-39017/05 RLR05 series components with identical failure rate (S 0.001%) and moisture-resistant, weldable construction.

Q: Are there compliance considerations when selecting between these parts?

A: Both parts share identical RoHS non-compliant and REACH Affected status. Compliance requirements must be evaluated at the system level regardless of which packaging format is selected.