RG2012P-6980-W-T1 Equivalent & Substitute Parts

Part Overview

The RG2012P-6980-W-T1 is a 698 Ohms ±0.05% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component features anti-sulfur coating and automotive AEC-Q200 qualification, suitable for high-reliability applications requiring precision resistance values and temperature stability across -55°C to 155°C operating range.

The RG2012P-6980-W-T1 is classified as obsolete. Equivalent and substitute parts are available from the same manufacturer series with active product status, offering direct functional replacement with enhanced specifications or alternative packaging configurations.

Substiute Parts

RG2012P-6980-W-T1

SusumuIn Stock: 757RG2012P-6980-W-T1 Datasheet

Current PartRFQ

RG2012P-6980-W-T5

SusumuIn Stock: 902RG2012P-6980-W-T5 Datasheet

DirectRFQ

RG2012N-6980-W-T1

SusumuIn Stock: 854RG2012N-6980-W-T1 Datasheet

UpgradeRFQ

RG2012V-6980-P-T1

SusumuIn Stock: 757RG2012V-6980-P-T1 Datasheet

UpgradeRFQ

RG2012V-6980-W-T1

SusumuIn Stock: 814RG2012V-6980-W-T1 Datasheet

UpgradeRFQ

RG2012V-6980-W-T5

SusumuIn Stock: 1012RG2012V-6980-W-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG2012P-6980-W-T1 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 698 Ohms
• Package / Case: 0805 (2012 Metric)
• Power rating: 0.125W (1/8W)
• Composition: Thin Film
• Features: Anti-Sulfur, Automotive AEC-Q200
• Operating temperature range: -55°C ~ 155°C
• RoHS compliance: ROHS3 Compliant

Allowable Variation Parameters:

• Tolerance: May be equal or tighter (±0.05% or better)
• Temperature coefficient: May be equal or lower (±25ppm/°C or better)
• Packaging format: Tape & Reel (TR) acceptable as substitute for bulk packaging
• Product status: Active status preferred for obsolete parts

All substitute parts listed maintain identical electrical performance within the specified operating envelope while offering improved or equivalent temperature stability characteristics.

Parameter Comparison

Engineering Selection Recommendations

Direct Replacement (Identical Specifications):

RG2012P-6980-W-T5 provides direct functional equivalence to the RG2012P-6980-W-T1 with identical electrical parameters. The primary distinction is packaging format (Tape & Reel versus bulk). This part maintains active product status and is suitable for immediate substitution in production environments.

Enhanced Specifications (Improved Temperature Stability):

RG2012N-6980-W-T1 offers improved temperature coefficient performance (±10ppm/°C versus ±25ppm/°C) while maintaining all other electrical and mechanical specifications. This upgrade is applicable for applications requiring enhanced thermal stability without design modification.

RG2012V-6980-W-T1 and RG2012V-6980-W-T5 provide superior temperature coefficient performance (±5ppm/°C) with identical tolerance and power ratings. Both variants are suitable for precision applications demanding minimal resistance drift across the full operating temperature range.

Enhanced Tolerance (Tighter Resistance Specification):

RG2012V-6980-P-T1 combines the tightest tolerance specification (±0.02%) with the lowest temperature coefficient (±5ppm/°C), representing the highest precision option within the substitute group. This part is applicable for high-accuracy measurement and calibration circuits.

All substitute parts maintain AEC-Q200 automotive qualification, ROHS3 compliance, and MSL 1 rating, ensuring compatibility with existing design requirements and supply chain specifications.

Frequently Asked Questions (FAQ)

Q: Can RG2012P-6980-W-T5 be used as a direct replacement for RG2012P-6980-W-T1?

A: Yes. Both parts share identical electrical specifications (698 Ohms ±0.05%, 0.125W, ±25ppm/°C). The difference is packaging format: RG2012P-6980-W-T5 is supplied in Tape & Reel format while RG2012P-6980-W-T1 was supplied in bulk. Electrical performance and mechanical compatibility are equivalent.

Q: What is the difference between the RG2012N and RG2012V series variants?

A: The RG2012N-6980-W-T1 features a temperature coefficient of ±10ppm/°C. The RG2012V series (RG2012V-6980-W-T1, RG2012V-6980-W-T5, RG2012V-6980-P-T1) features a temperature coefficient of ±5ppm/°C, providing superior thermal stability. All other parameters remain identical to the original part.

Q: Is RG2012V-6980-P-T1 compatible with designs specified for RG2012P-6980-W-T1?

A: Yes. RG2012V-6980-P-T1 is fully compatible. It maintains the same 698 Ohm resistance, 0.125W power rating, 0805 package, and operating temperature range. The tighter tolerance (±0.02% versus ±0.05%) and lower temperature coefficient (±5ppm/°C versus ±25ppm/°C) represent performance improvements with no design modifications required.

Q: Are all substitute parts AEC-Q200 qualified?

A: Yes. All substitute parts listed carry automotive AEC-Q200 qualification, anti-sulfur coating, and ROHS3 compliance, matching the original part's reliability and regulatory requirements.

Q: What is the significance of the T1 and T5 suffixes in part numbers?

A: The T1 and T5 suffixes indicate different packaging formats. T1 represents bulk packaging, while T5 represents Tape & Reel (TR) packaging. Electrical specifications are identical between these variants.

Q: Can substitute parts with lower temperature coefficients be used in applications not requiring enhanced thermal stability?

A: Yes. Parts with lower temperature coefficients (±10ppm/°C or ±5ppm/°C) are fully backward compatible with applications specified for ±25ppm/°C. The improved thermal stability introduces no compatibility issues and provides performance margin.