RG2012P-6653-D-T5 Equivalent & Substitute Parts

Part Overview

The RG2012P-6653-D-T5 is a 665 kOhms ±0.5% thin film chip resistor manufactured by Susumu in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is active in production status with 739 units currently in stock. Substitute parts are identified when equivalent resistance values, power ratings, package dimensions, and automotive compliance certifications are maintained across alternative manufacturers.

Substiute Parts

RG2012P-6653-D-T5

SusumuIn Stock: 841RG2012P-6653-D-T5 Datasheet

Current PartRFQ

ERA-6AEB6653V

Panasonic Electronic ComponentsIn Stock: 6627ERA-6AEB6653V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG2012P-6653-D-T5 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 665 kOhms
• Power rating: 0.125W (1/8W)
• Package format: 0805 (2012 Metric)
• Composition: Thin Film
• Temperature coefficient: ±25ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive compliance: AEC-Q200
• RoHS compliance: ROHS3

Allowable Variation:

• Tolerance may be tighter (lower tolerance value) without affecting circuit compatibility
• Manufacturer and series designation may differ

The ERA-6AEB6653V from Panasonic Electronic Components qualifies as a substitute part. This component maintains all mandatory parameters while providing improved tolerance specification (±0.1% versus ±0.5%), which represents an upgrade in precision without introducing incompatibility.

Parameter Comparison

Engineering Selection Recommendations

The ERA-6AEB6653V from Panasonic Electronic Components is a direct substitute for the RG2012P-6653-D-T5. Both components are active production parts with ROHS3 compliance and AEC-Q200 automotive qualification. The substitute part maintains identical electrical specifications across resistance, power rating, temperature coefficient, and operating temperature range. The tighter tolerance specification (±0.1% versus ±0.5%) of the ERA-6AEB6653V represents an improvement in precision and does not introduce any incompatibility with circuit requirements established for the original part. The maximum seated height difference (0.024" versus 0.020") remains within standard PCB assembly tolerances for 0805 package components. Both parts are packaged in Tape & Reel format suitable for automated assembly processes.

Frequently Asked Questions (FAQ)

Q: Can the ERA-6AEB6653V replace the RG2012P-6653-D-T5 in automotive applications?

A: Yes. Both components carry AEC-Q200 automotive qualification and maintain identical operating temperature ranges (-55°C ~ 155°C), power ratings (0.125W), and package specifications (0805). The substitute part is suitable for automotive circuit applications.

Q: What is the significance of the tolerance difference between these parts?

A: The RG2012P-6653-D-T5 has ±0.5% tolerance while the ERA-6AEB6653V has ±0.1% tolerance. The substitute part provides tighter tolerance, meaning the actual resistance value will be closer to the nominal 665 kOhms specification. This represents an upgrade in precision and does not create compatibility issues.

Q: Are there physical compatibility concerns with the height difference?

A: The RG2012P-6653-D-T5 has a maximum seated height of 0.020" (0.50mm) while the ERA-6AEB6653V has 0.024" (0.60mm). This 0.004" (0.10mm) difference is within standard PCB assembly tolerances for 0805 package components and does not present physical compatibility issues.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the RG2012P-6653-D-T5 and ERA-6AEB6653V are ROHS3 compliant, carry AEC-Q200 automotive ratings, and have Moisture Sensitivity Level 1 (Unlimited). Compliance profiles are equivalent.

Q: Can the ERA-6AEB6653V be used in high-reliability applications?

A: Both components are thin film resistors with AEC-Q200 qualification, suitable for automotive and high-reliability applications. The substitute part maintains the same composition, temperature coefficient (±25ppm/°C), and operating specifications as the original part.

Q: Is the Tape & Reel packaging identical for both parts?

A: Both parts are supplied in Tape & Reel (TR) packaging format, suitable for automated assembly processes. Packaging format compatibility is confirmed.