RG2012P-563-W-T5 Equivalent & Substitute Parts

Part Overview

The RG2012P-563-W-T5 is a 56 kOhms ±0.05% thin film chip resistor manufactured by Susumu in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is active in production status with 813 units currently in stock. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance ratings are maintained across alternative manufacturers.

Substiute Parts

RG2012P-563-W-T5

SusumuIn Stock: 867RG2012P-563-W-T5 Datasheet

Current PartRFQ

ERA-6ARW563V

Panasonic Electronic ComponentsIn Stock: 4121ERA-6ARW563V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG2012P-563-W-T5 is determined by the following critical parameters:

Electrical Specifications:

• Resistance value: 56 kOhms
• Tolerance: ±0.05%
• Power rating: 0.125W (1/8W)
• Operating temperature range: -55°C ~ 155°C

Mechanical Specifications:

• Package type: 0805 (2012 Metric)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Number of terminations: 2

Compliance & Certification:

• Automotive AEC-Q200 qualification
• RoHS3 compliance
• Moisture Sensitivity Level 1

The ERA-6ARW563V manufactured by Panasonic Electronic Components meets all critical substitution criteria. Both parts share identical resistance, tolerance, power rating, package format, and automotive compliance ratings. Differences in temperature coefficient and seated height do not affect functional interchangeability within the specified electrical and mechanical parameters.

Parameter Comparison

Engineering Selection Recommendations

RG2012P-563-W-T5 (Susumu) is the primary component specification. This part maintains active production status with established supply availability of 813 units in stock. The anti-sulfur coating provides enhanced environmental protection for automotive applications.

ERA-6ARW563V (Panasonic Electronic Components) is a direct functional equivalent. This substitute maintains all critical electrical and mechanical parameters required for interchangeability. The Panasonic part offers superior temperature coefficient performance (±10ppm/°C versus ±25ppm/°C), which provides enhanced stability across the operating temperature range. Both parts carry identical AEC-Q200 automotive qualification and RoHS3 compliance certification. The ERA-6ARW563V demonstrates higher inventory availability with 4053 units in stock, supporting supply chain continuity.

Selection between these parts is based on availability, supply chain requirements, and application-specific thermal stability needs. Both parts are suitable for direct substitution in automotive and industrial applications requiring 56 kOhms ±0.05% thin film resistors in 0805 package format.

Frequently Asked Questions (FAQ)

Q: Can ERA-6ARW563V replace RG2012P-563-W-T5 in existing designs?

A: Yes. Both parts share identical resistance (56 kOhms), tolerance (±0.05%), power rating (0.125W), package format (0805), and automotive AEC-Q200 certification. The parts are mechanically and electrically interchangeable within the specified parameters.

Q: What is the difference in temperature coefficient between these parts?

A: The RG2012P-563-W-T5 has a temperature coefficient of ±25ppm/°C, while the ERA-6ARW563V has ±10ppm/°C. The Panasonic part exhibits lower temperature-dependent resistance variation, providing improved stability across the -55°C ~ 155°C operating range.

Q: Are both parts suitable for automotive applications?

A: Yes. Both the RG2012P-563-W-T5 and ERA-6ARW563V carry AEC-Q200 automotive qualification, confirming suitability for automotive-grade applications.

Q: Do these parts have identical physical dimensions?

A: Both parts use the 0805 (2012 Metric) package with identical length (0.079" / 2.00mm) and width (0.049" / 1.25mm). The seated height differs slightly: RG2012P-563-W-T5 is 0.020" (0.50mm) maximum, while ERA-6ARW563V is 0.024" (0.60mm) maximum. This difference does not affect PCB layout compatibility for standard 0805 footprints.

Q: What is the moisture sensitivity level for both parts?

A: Both parts are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Are both parts RoHS3 compliant?

A: Yes. Both the RG2012P-563-W-T5 and ERA-6ARW563V are ROHS3 compliant and REACH unaffected.