RG2012N-7682-C-T5 Equivalent & Substitute Parts

Part Overview

The Susumu RG2012N-7682-C-T5 is a 76.8 kOhms ±0.25% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component features anti-sulfur construction and automotive AEC-Q200 qualification, suitable for high-reliability applications requiring precision resistance values across extended temperature ranges (-55°C to 155°C).

The RG2012N-7682-C-T5 is classified as obsolete. Equivalent and substitute parts with active product status are available to support ongoing production requirements and design continuity. Substitute components maintain identical resistance values, package dimensions, and automotive ratings while offering improved tolerance specifications or alternative packaging configurations.

Substiute Parts

RG2012N-7682-C-T5

SusumuIn Stock: 877RG2012N-7682-C-T5 Datasheet

Current PartRFQ

RG2012N-7682-B-T5

SusumuIn Stock: 1194RG2012N-7682-B-T5 Datasheet

UpgradeRFQ

RG2012N-7682-W-T1

SusumuIn Stock: 875RG2012N-7682-W-T1 Datasheet

UpgradeRFQ

RG2012N-7682-W-T5

SusumuIn Stock: 862RG2012N-7682-W-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012N-7682-C-T5 is determined by strict equivalence across the following critical parameters:

Mandatory Equivalence Parameters:

• Resistance value: 76.8 kOhms (exact match required)
• Package / Case: 0805 (2012 Metric) (physical and electrical compatibility)
• Power rating: 0.125W (1/8W) (thermal and electrical performance)
• Composition: Thin Film (electrical characteristics and stability)
• Temperature coefficient: ±10ppm/°C (temperature stability)
• Operating temperature range: -55°C to 155°C (environmental performance)
• Automotive rating: AEC-Q200 (reliability and qualification)
• Anti-sulfur feature: Present (corrosion resistance)

Allowable Variation Parameters:

• Tolerance: Substitute parts may feature tighter (lower) tolerance values than the original ±0.25% specification
• Packaging configuration: Tape & Reel (TR) packaging is compatible with the original component
• Product status: Active status substitutes are preferred for obsolete components

All substitute parts listed maintain identical mechanical dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm) and maximum seated height (0.020" / 0.50mm), ensuring direct footprint compatibility on printed circuit boards.

Parameter Comparison

Engineering Selection Recommendations

RG2012N-7682-B-T5 (±0.1% Tolerance)

This substitute provides improved tolerance specification (±0.1% versus ±0.25%) while maintaining all other electrical and mechanical parameters. The RG2012N-7682-B-T5 is classified as active product status, ensuring long-term availability and supply chain continuity. This component is suitable for applications where the tighter tolerance specification provides additional design margin without requiring circuit redesign. Tape & Reel packaging supports automated assembly processes.

RG2012N-7682-W-T5 (±0.05% Tolerance)

This substitute offers the highest tolerance specification (±0.05%) among available alternatives, providing maximum precision for applications requiring tight resistance value control. The RG2012N-7682-W-T5 maintains active product status and is packaged in Tape & Reel format. This component is appropriate for precision analog circuits, reference networks, and measurement applications where resistance accuracy directly impacts circuit performance.

RG2012N-7682-W-T1 (±0.05% Tolerance)

This substitute is functionally equivalent to the RG2012N-7682-W-T5, offering identical ±0.05% tolerance and active product status. The primary distinction is the packaging tape configuration (T1 versus T5), which may affect component feeding characteristics in specific automated assembly equipment. Selection between RG2012N-7682-W-T5 and RG2012N-7682-W-T1 depends on assembly line compatibility requirements.

All substitute parts maintain AEC-Q200 automotive qualification, anti-sulfur construction, ROHS3 compliance, and unlimited moisture sensitivity rating, ensuring direct functional replacement in automotive and high-reliability applications.

Frequently Asked Questions (FAQ)

Q: Can the RG2012N-7682-B-T5 be used as a direct replacement for the RG2012N-7682-C-T5?

A: Yes. The RG2012N-7682-B-T5 is a direct substitute. Both components share identical resistance value (76.8 kOhms), package dimensions (0805 / 2012 Metric), power rating (0.125W), temperature coefficient (±10ppm/°C), operating temperature range (-55°C to 155°C), and automotive AEC-Q200 qualification. The RG2012N-7682-B-T5 features improved tolerance (±0.1% versus ±0.25%), which provides additional design margin. No circuit modifications are required.

Q: What is the difference between RG2012N-7682-W-T5 and RG2012N-7682-W-T1?

A: Both components are electrically and mechanically identical, featuring 76.8 kOhms resistance, ±0.05% tolerance, 0805 package, and AEC-Q200 rating. The designation difference (T5 versus T1) refers to the tape configuration used in Tape & Reel packaging. Selection between these parts depends on compatibility with specific automated component placement equipment. Consult assembly equipment specifications to determine appropriate tape configuration.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Yes. The RG2012N-7682-B-T5, RG2012N-7682-W-T5, and RG2012N-7682-W-T1 are all supplied in Tape & Reel (TR) packaging, which supports automated assembly processes. The original RG2012N-7682-C-T5 was supplied in bulk packaging. Tape & Reel format is compatible with standard pick-and-place equipment and provides improved handling efficiency for production environments.

Q: Can a ±0.05% tolerance part be used in an application designed for ±0.25% tolerance?

A: Yes. A component with tighter (lower) tolerance specification can be used in applications designed for looser tolerance. The ±0.05% tolerance parts (RG2012N-7682-W-T5 and RG2012N-7682-W-T1) exceed the performance requirements of the original ±0.25% specification and provide additional design margin. No circuit modifications are required.

Q: Do all substitute parts maintain automotive AEC-Q200 qualification?

A: Yes. All substitute parts listed (RG2012N-7682-B-T5, RG2012N-7682-W-T5, and RG2012N-7682-W-T1) maintain AEC-Q200 automotive qualification, anti-sulfur construction, and identical operating temperature range (-55°C to 155°C). These components are suitable for automotive and high-reliability applications requiring equivalent qualification levels.

Q: What is the significance of the anti-sulfur feature?

A: The anti-sulfur feature provides corrosion resistance in environments containing hydrogen sulfide or sulfur-containing compounds. All listed components, including the original RG2012N-7682-C-T5 and all substitutes, incorporate anti-sulfur construction. This feature is maintained across all equivalent and substitute parts.

Q: Are all parts ROHS3 compliant?

A: Yes. The RG2012N-7682-C-T5 and all substitute parts (RG2012N-7682-B-T5, RG2012N-7682-W-T5, and RG2012N-7682-W-T1) are ROHS3 compliant. All components are also REACH unaffected and classified under ECCN EAR99, meeting environmental and export compliance requirements.