RG1608P-2672-B-T5 Equivalent & Substitute Parts

Part Overview

The RG1608P-2672-B-T5 is a 26.7 kOhms ±0.1% thin film chip resistor manufactured by Susumu in 0603 (1608 Metric) package format with 0.1W power rating. This component is rated for automotive applications under AEC-Q200 standard and features anti-sulfur construction. The part is active in production status with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1).

Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity while maintaining electrical and mechanical compatibility with the original design specification.

Substiute Parts

RG1608P-2672-B-T5

SusumuIn Stock: 912RG1608P-2672-B-T5 Datasheet

Current PartRFQ

ERA-3AEB2672V

Panasonic Electronic ComponentsIn Stock: 4169ERA-3AEB2672V Datasheet

DirectRFQ

MCT06030D2672BP500

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 6214MCT06030D2672BP500 Datasheet

DirectRFQ

RT0603BRD0726K7L

YAGEOIn Stock: 20597RT0603BRD0726K7L Datasheet

DirectRFQ

TNPW060326K7BEEA

Vishay DaleIn Stock: 28387TNPW060326K7BEEA Datasheet

DirectRFQ

TNPW060326K7BEEN

Vishay DaleIn Stock: 2053TNPW060326K7BEEN Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict alignment with the following electrical and mechanical parameters:

Primary Substitution Criteria:

• Resistance value: 26.7 kOhms (exact match required)
• Tolerance: ±0.1% (exact match required)
• Package: 0603 (1608 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Temperature Coefficient: ±25ppm/°C (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)
• Moisture Sensitivity Level: 1 (exact match required)

Secondary Compatibility Parameters:

• Power rating: 0.1W minimum (equal or greater acceptable)
• Operating temperature range: -55°C minimum, 155°C maximum (equal or greater range acceptable)
• Packaging: Tape & Reel (TR) format

All identified substitute parts meet or exceed these criteria. Variations in physical dimensions (length, width, height) and manufacturer-specific features (such as automotive AEC-Q200 rating presence or anti-sulfur construction) do not disqualify substitution when primary electrical parameters align.

Parameter Comparison

Engineering Selection Recommendations

Full Equivalents (Identical Electrical and Mechanical Specifications):

ERA-3AEB2672V (Panasonic Electronic Components) and RT0603BRD0726K7L (YAGEO) are direct functional equivalents with matching resistance, tolerance, power rating, temperature coefficient, and operating temperature range. Both maintain ROHS3 compliance and MSL 1 rating. ERA-3AEB2672V includes AEC-Q200 automotive qualification matching the original part. RT0603BRD0726K7L does not carry AEC-Q200 rating but meets all electrical parameters.

Enhanced Specification Substitutes:

TNPW060326K7BEEA and TNPW060326K7BEEN (Vishay Dale) provide higher power rating (0.21W versus 0.1W) and extended operating temperature range (-55°C to 175°C versus -55°C to 155°C). Both include AEC-Q200 automotive qualification and anti-sulfur construction. These parts are suitable for applications requiring thermal margin or higher power dissipation capability within the 0603 package envelope.

Constrained Temperature Range Substitute:

MCT06030D2672BP500 (Vishay Beyschlag/Draloric/BC Components) operates within -55°C to 125°C range, which is narrower than the original specification (-55°C to 155°C). This part is suitable only for applications where the upper operating temperature does not exceed 125°C. It includes anti-sulfur construction but lacks AEC-Q200 automotive rating.

All substitute parts are active in production status with ROHS3 compliance and unlimited moisture sensitivity level.

Frequently Asked Questions (FAQ)

Q: Can TNPW060326K7BEEA or TNPW060326K7BEEN be used as direct replacements for RG1608P-2672-B-T5?

A: Yes. Both parts meet all primary substitution criteria: 26.7 kOhms resistance, ±0.1% tolerance, 0603 package, thin film composition, ±25ppm/°C temperature coefficient, ROHS3 compliance, and MSL 1 rating. The higher power rating (0.21W) and extended temperature range (-55°C to 175°C) provide additional design margin and do not prevent substitution in applications designed for the original 0.1W, -55°C to 155°C specification.

Q: What is the difference between ERA-3AEB2672V and RT0603BRD0726K7L?

A: Both parts are electrically and mechanically identical to the original RG1608P-2672-B-T5 in all primary parameters. The key difference is that ERA-3AEB2672V includes AEC-Q200 automotive qualification, while RT0603BRD0726K7L does not. For automotive applications requiring AEC-Q200 compliance, ERA-3AEB2672V is the appropriate choice.

Q: Can MCT06030D2672BP500 be used in all applications where RG1608P-2672-B-T5 is specified?

A: MCT06030D2672BP500 is suitable only for applications where the maximum operating temperature does not exceed 125°C. The original part specification extends to 155°C. If the application requires operation above 125°C, MCT06030D2672BP500 is not appropriate. Additionally, this part does not carry AEC-Q200 automotive rating.

Q: Are all substitute parts available in Tape & Reel (TR) packaging?

A: Yes. All identified substitute parts are supplied in Tape & Reel (TR) format, matching the original packaging specification.

Q: What is the significance of the anti-sulfur feature?

A: Anti-sulfur construction protects the resistor from corrosion in environments with hydrogen sulfide exposure. RG1608P-2672-B-T5, MCT06030D2672BP500, TNPW060326K7BEEA, and TNPW060326K7BEEN include this feature. ERA-3AEB2672V and RT0603BRD0726K7L do not specify anti-sulfur construction. For applications in corrosive environments, parts with anti-sulfur construction are preferred.

Q: Do all substitute parts meet automotive AEC-Q200 qualification?

A: No. RG1608P-2672-B-T5, ERA-3AEB2672V, TNPW060326K7BEEA, and TNPW060326K7BEEN carry AEC-Q200 rating. MCT06030D2672BP500 and RT0603BRD0726K7L do not. For automotive applications requiring AEC-Q200 compliance, selection must be limited to qualified parts.

Q: What is the physical size difference between substitute parts?

A: All parts use the 0603 (1608 Metric) package. Length and width dimensions vary slightly between manufacturers (1.55mm to 1.60mm length, 0.80mm to 0.85mm width) and height ranges from 0.50mm to 0.55mm seated maximum. These variations are within standard 0603 package tolerances and do not affect PCB layout compatibility.

Q: Can TNPW060326K7BEEA and TNPW060326K7BEEN be used interchangeably?

A: Yes. Both parts are electrically and mechanically identical. The difference in part number designation reflects different packaging or manufacturing batches from Vishay Dale. Both are active in production status with identical specifications.