RE0805FRE07255KL Equivalent & Substitute Parts

Part Overview

The RE0805FRE07255KL is a 255 kOhms ±1% thick film chip resistor manufactured by YAGEO in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation with an operating temperature range of -55°C to 155°C. The part maintains Active product status and is ROHS3 compliant with unlimited moisture sensitivity level (MSL 1). Substitute parts are identified when equivalent resistance values, package dimensions, and thermal specifications align within acceptable electrical and mechanical tolerances for the 0805 form factor.

Substiute Parts

RE0805FRE07255KL

YAGEOIn Stock: 1028RE0805FRE07255KL Datasheet

Current PartRFQ

ERJ-PB6B2553V

Panasonic Electronic ComponentsIn Stock: 2114ERJ-PB6B2553V Datasheet

MFR RecommendedRFQ

ERJ-PB6D2553V

Panasonic Electronic ComponentsIn Stock: 4937ERJ-PB6D2553V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RE0805FRE07255KL are qualified based on the following criteria:

• Identical resistance value: 255 kOhms
• Identical package format: 0805 (2012 Metric)
• Identical composition: Thick Film
• Identical operating temperature range: -55°C ~ 155°C
• Identical temperature coefficient: ±50ppm/°C
• Tolerance equal to or tighter than ±1%
• Power rating equal to or greater than 0.125W
• Active product status
• ROHS3 compliance

The two qualified substitutes are Panasonic ERJ-PB6 series resistors, which meet all mechanical and electrical compatibility requirements while offering enhanced specifications in tolerance and power rating.

Parameter Comparison

Engineering Selection Recommendations

Both ERJ-PB6B2553V and ERJ-PB6D2553V substitutes maintain Active product status and ROHS3 compliance equivalent to the main part. The Panasonic ERJ-PB6 series components provide enhanced specifications with increased power ratings (0.25W versus 0.125W) and tighter tolerance options (±0.1% and ±0.5% versus ±1%). Both substitutes carry AEC-Q200 automotive qualification, which represents an additional compliance certification not specified for the YAGEO part. The identical package dimensions, thermal characteristics, and composition ensure direct mechanical and electrical compatibility in 0805 form factor applications.

Frequently Asked Questions (FAQ)

Q: Can ERJ-PB6B2553V and ERJ-PB6D2553V be used interchangeably with RE0805FRE07255KL?

A: Yes. Both Panasonic substitutes share identical resistance values, package formats (0805), operating temperature ranges (-55°C ~ 155°C), and temperature coefficients (±50ppm/°C). The substitutes provide equal or superior power ratings and tolerance specifications.

Q: What is the difference between ERJ-PB6B2553V and ERJ-PB6D2553V?

A: The primary difference is tolerance specification. ERJ-PB6B2553V offers ±0.1% tolerance, while ERJ-PB6D2553V offers ±0.5% tolerance. Both maintain identical resistance values, package dimensions, and power ratings (0.25W).

Q: Are the physical dimensions identical between the main part and substitutes?

A: The length and width dimensions are identical (0.079" L x 0.049" W / 2.00mm x 1.25mm). The seated height differs slightly: RE0805FRE07255KL maximum 0.024" (0.60mm) versus ERJ-PB6 series maximum 0.028" (0.70mm). This variation remains within standard 0805 package tolerances and does not affect PCB assembly compatibility.

Q: Do the substitutes require different soldering or assembly procedures?

A: No. Both substitutes use identical 0805 (2012 Metric) package specifications and two-termination configuration, requiring no changes to existing assembly processes or solder profiles.

Q: What certifications do the substitute parts carry?

A: Both ERJ-PB6B2553V and ERJ-PB6D2553V carry AEC-Q200 automotive qualification and ROHS3 compliance. The main part specifies ROHS3 compliance without AEC-Q200 designation.