RCS3216F6982CS Equivalent & Substitute Parts Reference

Part Overview

The RCS3216F6982CS is a 69.8 kOhms ±1% 0.25W chip resistor in 1206 (3216 Metric) package manufactured by Samsung Electro-Mechanics. This thick film resistor features anti-sulfur and moisture-resistant properties, operating across -55°C to 155°C with a temperature coefficient of ±100ppm/°C. The part is currently active in production with 1,076 units in stock. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and compliance certifications to ensure direct interchangeability in circuit applications.

Substiute Parts

RCS3216F6982CS

Samsung Electro-MechanicsIn Stock: 1098RCS3216F6982CS Datasheet

Current PartRFQ

CR1206-FX-6982ELF

Bourns Inc.In Stock: 25544CR1206-FX-6982ELF Datasheet

SimilarRFQ

CRCW120669K8FKEA

Vishay DaleIn Stock: 15256CRCW120669K8FKEA Datasheet

SimilarRFQ

ERJ-8ENF6982V

Panasonic Electronic ComponentsIn Stock: 5516ERJ-8ENF6982V Datasheet

SimilarRFQ

RC1206FR-0769K8L

YAGEOIn Stock: 16153RC1206FR-0769K8L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RCS3216F6982CS is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Requirements:

• Resistance value: 69.8 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Equivalence Requirements:

• Package type: 1206 (3216 Metric)
• Number of terminations: 2
• Physical dimensions compatible with 1206 footprint

Compliance Requirements:

• RoHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Unaffected status

All four substitute parts listed meet these core requirements. Variations in height (seated maximum) and specific feature sets (anti-sulfur vs. automotive AEC-Q200 certification) do not affect functional interchangeability in standard applications.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection (Active Production):

CR1206-FX-6982ELF (Bourns Inc.) is the preferred substitute with 25,459 units in stock. This part maintains full electrical and mechanical equivalence with the RCS3216F6982CS while offering superior inventory availability. Both parts are active in production with ROHS3 compliance and MSL 1 rating.

RC1206FR-0769K8L (YAGEO) is an alternative active substitute with 16,125 units available. Dimensions are within acceptable tolerance for 1206 footprint compatibility (3.10mm length vs. 3.20mm nominal).

CRCW120669K8FKEA (Vishay Dale) is suitable for applications requiring automotive AEC-Q200 certification, with 15,159 units in stock. This part offers the lowest seated height (0.024" / 0.60mm) and is recommended for space-constrained designs.

Secondary Selection (Legacy Applications):

ERJ-8ENF6982V (Panasonic Electronic Components) carries a "Not For New Designs" status and should be used only in legacy system maintenance or repair applications where original part compatibility is required. 5,451 units remain in inventory.

All substitute parts are REACH Unaffected and classified under ECCN EAR99 with HTSUS code 8533.21.0030, matching the regulatory profile of the main part.

Frequently Asked Questions (FAQ)

Q: Can CR1206-FX-6982ELF replace RCS3216F6982CS directly without circuit modification?

A: Yes. Both parts share identical electrical specifications (69.8 kOhms ±1%, 0.25W, ±100ppm/°C, -55°C to 155°C) and are packaged in 1206 (3216 Metric) with 2 terminations. The 0.004" difference in seated height (0.030" vs. 0.026") is within standard PCB assembly tolerances and does not require design changes.

Q: What is the difference between the anti-sulfur feature of RCS3216F6982CS and the moisture-resistant feature of CR1206-FX-6982ELF?

A: Both features address environmental protection. Anti-sulfur coating prevents corrosion from sulfur-containing atmospheres, while moisture-resistant construction protects against humidity ingress. Both parts achieve MSL 1 (Unlimited) rating. Selection depends on application environment; anti-sulfur is preferred in industrial settings with sulfur exposure, while moisture-resistant is standard for general electronics.

Q: Why is ERJ-8ENF6982V marked "Not For New Designs"?

A: This designation indicates the manufacturer (Panasonic) has discontinued active development for this part series. While functionally equivalent and currently in stock (5,451 units), it should be used only for maintenance of existing systems. New circuit designs should specify CR1206-FX-6982ELF, RC1206FR-0769K8L, or CRCW120669K8FKEA.

Q: Are all substitute parts suitable for automotive applications?

A: CRCW120669K8FKEA and ERJ-8ENF6982V carry AEC-Q200 certification for automotive use. CR1206-FX-6982ELF and RC1206FR-0769K8L do not list automotive certification. For automotive applications, specify CRCW120669K8FKEA (Vishay Dale) as the primary choice.

Q: What is the significance of the 0.122" length of RC1206FR-0769K8L versus 0.126" for other parts?

A: The 0.004" (0.10mm) difference falls within the 1206 package tolerance band and does not affect PCB footprint compatibility. Both dimensions are acceptable for standard 1206 land patterns. This variation is typical across manufacturers and does not impact electrical performance or mechanical fit.

Q: Can these parts be used interchangeably in high-temperature applications?

A: Yes. All substitute parts operate across the identical temperature range (-55°C to 155°C) with matching ±100ppm/°C temperature coefficient. Selection among substitutes for high-temperature applications should be based on availability and compliance requirements rather than thermal performance differences.