RCP1206B10R0JS6 Equivalent & Substitute Parts

Part Overview

The RCP1206B10R0JS6 is a 10 Ohms ±5% 2.4W thick film chip resistor in 1206 (3216 Metric) package manufactured by Vishay Dale. This component is actively produced and widely used in applications requiring moisture-resistant surface mount resistors with moderate tolerance specifications. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained while offering improved specifications or availability advantages.

Substiute Parts

RCP1206B10R0JS6

Vishay DaleIn Stock: 805RCP1206B10R0JS6 Datasheet

Current PartRFQ

RCP1206W10R0GEB

Vishay DaleIn Stock: 4995RCP1206W10R0GEB Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

The RCP1206W10R0GEB qualifies as a direct substitute for the RCP1206B10R0JS6 based on the following critical parameters:

• Identical resistance value: 10 Ohms
• Identical power rating: 2.4W
• Identical package: 1206 (3216 Metric)
• Identical physical dimensions: 0.122" L x 0.060" W (3.10mm x 1.52mm)
• Identical composition: Thick Film
• Identical temperature coefficient: ±150ppm/°C
• Identical operating temperature range: -65°C ~ 155°C
• Identical moisture resistance feature and MSL rating

The substitute part offers improved tolerance specification (±2% versus ±5%), which represents an upgrade in precision without compromising any electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

The RCP1206W10R0GEB is a qualified substitute for the RCP1206B10R0JS6 in applications where component specifications are compatible. The substitute part maintains all critical electrical and mechanical parameters while providing improved tolerance performance (±2% versus ±5%). Additionally, the RCP1206W10R0GEB achieves ROHS3 compliance, whereas the main part is RoHS non-compliant. Both parts are actively produced by Vishay Dale and maintain identical thermal and environmental operating characteristics. Packaging differs between the two parts (Cut Tape versus Tape & Reel), which may affect procurement and assembly workflows but does not impact functional compatibility.

Frequently Asked Questions (FAQ)

Q: Can RCP1206W10R0GEB replace RCP1206B10R0JS6 in existing designs?

A: Yes. Both parts share identical electrical specifications (10 Ohms, 2.4W), identical package geometry (1206), and identical thermal characteristics (-65°C ~ 155°C). The substitute offers tighter tolerance (±2% versus ±5%), which is functionally compatible with designs specified for ±5% tolerance.

Q: What is the difference in tolerance between these parts?

A: The main part RCP1206B10R0JS6 has ±5% tolerance, while the substitute RCP1206W10R0GEB has ±2% tolerance. The tighter tolerance of the substitute part does not create incompatibility; it represents improved precision.

Q: Are the physical dimensions identical?

A: Yes. Both parts are 1206 (3216 Metric) package with identical dimensions: 0.122" L x 0.060" W (3.10mm x 1.52mm) and maximum seated height of 0.025" (0.64mm). They are mechanically interchangeable on PCBs.

Q: What is the difference in packaging?

A: RCP1206B10R0JS6 is supplied in Tape & Reel (TR) format, while RCP1206W10R0GEB is supplied in Cut Tape (CT) format. This affects procurement and assembly processes but does not impact electrical or mechanical compatibility.

Q: Does RoHS compliance affect substitution?

A: The RCP1206W10R0GEB is ROHS3 compliant, while the main part is RoHS non-compliant. If your application or region requires RoHS compliance, the substitute part meets this requirement. If RoHS compliance is not required, both parts are functionally equivalent.

Q: Are both parts actively manufactured?

A: Yes. Both RCP1206B10R0JS6 and RCP1206W10R0GEB are listed as Active products by Vishay Dale.