Equivalent & Substitute Parts for RC3216J113CS

Part Overview

The RC3216J113CS is an 11 kOhms ±5% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1). The RC3216J113CS serves as a general-purpose resistor for standard applications where ±5% tolerance meets circuit requirements. Substitute parts are identified for applications requiring improved tolerance specifications, automotive-grade certifications, or alternative manufacturer sourcing while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value	Criticality for Substitution
Resistance Value	11 kOhms	Critical - Must match exactly
Tolerance	±5%	Critical - Defines acceptable variance
Power Rating	0.25W (1/4W)	Critical - Minimum thermal capability
Package Type	1206 (3216 Metric)	Critical - PCB footprint compatibility
Composition	Thick Film	Important - Electrical characteristics
Temperature Coefficient	±100ppm/°C	Important - Temperature stability
Operating Temperature Range	-55°C ~ 155°C	Important - Environmental limits
RoHS Status	ROHS3 Compliant	Important - Regulatory compliance
Moisture Sensitivity Level	MSL 1 (Unlimited)	Important - Handling requirements

Substitute Part Grouping Explanation

Substitute parts are organized into three categories based on substitution relationships:

Direct Substitutes (Equivalent Tolerance): Parts maintaining ±5% tolerance specification identical to the main part. These provide direct functional equivalence with no performance upgrade or downgrade.

Upgrade Substitutes (Improved Tolerance): Parts with ±1% tolerance specification, providing tighter resistance tolerance than the original ±5% specification. These are suitable for applications requiring improved accuracy while maintaining all other electrical and mechanical parameters.

Similar Parts (Different Power Rating): Parts with identical electrical specifications but different power ratings or packaging variants. These require circuit-level evaluation for suitability.

Substitution eligibility is determined by the following parameters:

Resistance value: 11 kOhms (exact match required)
Package type: 1206 (3216 Metric) (exact match required)
Power rating: 0.25W minimum (equal or higher acceptable)
Composition: Thick Film (maintained across all substitutes)
Temperature coefficient: ±100ppm/°C (maintained across all substitutes)
Operating temperature: -55°C ~ 155°C (maintained across all substitutes)
RoHS compliance: ROHS3 (maintained across all substitutes)
MSL rating: 1 (Unlimited) (maintained across all substitutes)

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	Features	Product Status
RC3216J113CS	Samsung Electro-Mechanics	11 kOhms	±5%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Moisture Resistant	Active
RC1206JR-0711KL	YAGEO	11 kOhms	±5%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Moisture Resistant	Active
RMCF1206FT11K0	Stackpole Electronics Inc	11 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200	Active
AC1206FR-0711KL	YAGEO	11 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200, Moisture Resistant	Active
CR1206-FX-1102ELF	Bourns Inc.	11 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Moisture Resistant	Active
ERJ-8ENF1102V	Panasonic Electronic Components	11 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200	Not For New Designs
KTR18EZPF1102	Rohm Semiconductor	11 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200, High Voltage	Active
MCR18ERTF1102	Rohm Semiconductor	11 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	-	Discontinued at DiGi Electronics
RC1206FR-0711KL	YAGEO	11 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Moisture Resistant	Active
CRCW120611K0FKEA	Vishay Dale	11 kOhms	±1%	0.25	1206	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200	Active
CRCW120611K0FKEAHP	Vishay Dale	11 kOhms	±1%	0.75	1206	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200, Pulse Withstanding	Active

Engineering Selection Recommendations

For Direct Substitution (Equivalent ±5% Tolerance):

RC1206JR-0711KL from YAGEO is the primary direct substitute. This part maintains identical electrical specifications (11 kOhms ±5%, 0.25W) and package configuration (1206). Both parts are Active status with ROHS3 compliance and MSL 1 rating. Selection between RC3216J113CS and RC1206JR-0711KL depends on manufacturer preference, supply chain availability, and packaging format (the main part uses standard packaging while the substitute uses Tape & Reel).

For Tolerance Upgrade (±1% Tolerance):

Multiple Active-status options are available for applications requiring improved tolerance:

RC1206FR-0711KL (YAGEO) provides ±1% tolerance with moisture-resistant features and Active product status. This part is suitable for general industrial applications requiring tighter tolerance specifications.

RMCF1206FT11K0 (Stackpole Electronics Inc) offers ±1% tolerance with Automotive AEC-Q200 certification. This part is appropriate for automotive and high-reliability applications.

AC1206FR-0711KL (YAGEO) combines ±1% tolerance with both Automotive AEC-Q200 certification and moisture-resistant features, providing enhanced reliability for demanding environments.

CRCW120611K0FKEA (Vishay Dale) delivers ±1% tolerance with Automotive AEC-Q200 certification and is suitable for automotive-grade applications.

CR1206-FX-1102ELF (Bourns Inc.) provides ±1% tolerance with moisture-resistant features and Active product status.

KTR18EZPF1102 (Rohm Semiconductor) offers ±1% tolerance with Automotive AEC-Q200 certification and high-voltage features for specialized applications.

For Higher Power Rating:

CRCW120611K0FKEAHP (Vishay Dale) provides 0.75W power rating (compared to 0.25W standard) with ±1% tolerance and Automotive AEC-Q200 certification. This part is suitable only for applications where increased power dissipation capability is required.

Parts to Avoid for New Designs:

ERJ-8ENF1102V (Panasonic Electronic Components) carries "Not For New Designs" product status and should not be selected for new circuit development.

MCR18ERTF1102 (Rohm Semiconductor) is listed as "Discontinued at DiGi Electronics" and should not be used for new applications.

Frequently Asked Questions (FAQ)

Q: Can I substitute RC3216J113CS with a ±1% tolerance part?

A: Yes. Parts with ±1% tolerance (such as RC1206FR-0711KL, RMCF1206FT11K0, or AC1206FR-0711KL) are suitable substitutes. The ±1% tolerance is tighter than the original ±5%, meaning the actual resistance value will be closer to the nominal 11 kOhms specification. This upgrade does not create compatibility issues and improves circuit accuracy.

Q: What is the difference between direct substitutes and upgrade substitutes?

A: Direct substitutes (RC1206JR-0711KL) maintain the original ±5% tolerance specification, providing equivalent performance. Upgrade substitutes have ±1% tolerance, offering improved accuracy. Both types maintain identical package, power rating, and operating temperature specifications.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All substitute parts listed carry ROHS3 compliance status, matching the original RC3216J113CS specification. All parts also maintain MSL 1 (Unlimited) moisture sensitivity level.

Q: Can I use CRCW120611K0FKEAHP as a direct replacement?

A: CRCW120611K0FKEAHP has a 0.75W power rating instead of the standard 0.25W. While electrically compatible (11 kOhms ±1%), this part is physically larger and has different thermal characteristics. Use this part only if your circuit requires higher power dissipation capability. Verify PCB layout compatibility before substitution.

Q: What does "Automotive AEC-Q200" certification mean?

A: AEC-Q200 is an automotive industry qualification standard for passive components. Parts with this certification (RMCF1206FT11K0, AC1206FR-0711KL, CRCW120611K0FKEA, KTR18EZPF1102) meet stringent reliability and performance requirements for automotive applications. These parts are suitable for both automotive and general industrial use.

Q: Why should I avoid ERJ-8ENF1102V and MCR18ERTF1102?

A: ERJ-8ENF1102V carries "Not For New Designs" status, indicating the manufacturer no longer recommends this part for new circuit development. MCR18ERTF1102 is discontinued at DiGi Electronics, limiting availability. Both parts should be avoided in new designs to ensure long-term supply chain reliability.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Most substitute parts are available in Tape & Reel (TR) packaging. MCR18ERTF1102 is available in Cut Tape (CT) & Digi-Reel® packaging. Verify packaging format with your supplier to ensure compatibility with your assembly process.

Q: What is the temperature coefficient specification and why does it matter?

A: The ±100ppm/°C temperature coefficient indicates how much the resistance value changes with temperature. All listed parts maintain this specification, ensuring consistent performance across the -55°C to 155°C operating range. This parameter is maintained across all substitutes.

Q: Can I mix different manufacturers' parts in the same circuit?

A: Yes. All substitute parts meet identical electrical specifications (11 kOhms, same tolerance, 0.25W, 1206 package) and environmental ratings (ROHS3, MSL 1). Mixing manufacturers is acceptable from an engineering standpoint, though design documentation should specify approved part numbers.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message