RC1608F60R4CS Equivalent & Substitute Parts Reference

Part Overview

The RC1608F60R4CS is a 60.4 Ohm ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics in 0603 (1608 Metric) package format. This component is rated for 0.1W (1/10W) power dissipation with moisture-resistant construction and operates across the temperature range of -55°C to 155°C. The part maintains Active product status and is RoHS3 compliant with MSL Level 1 (Unlimited moisture sensitivity).

Equivalent and substitute parts are identified based on matching electrical specifications (resistance value, tolerance, power rating), mechanical compatibility (package dimensions, termination count), environmental ratings, and compliance certifications. Substitute parts enable design flexibility, supply chain continuity, and manufacturing optimization when the primary part is unavailable or when design requirements permit alternative qualified sources.

Substiute Parts

RC1608F60R4CS

Samsung Electro-MechanicsIn Stock: 1198RC1608F60R4CS Datasheet

Current PartRFQ

CR0603-FX-60R4ELF

Bourns Inc.In Stock: 204561CR0603-FX-60R4ELF Datasheet

DirectRFQ

RC0603FR-0760R4L

YAGEOIn Stock: 210314RC0603FR-0760R4L Datasheet

DirectRFQ

AC0603FR-0760R4L

YAGEOIn Stock: 16949AC0603FR-0760R4L Datasheet

SimilarRFQ

CRCW060360R4FKEA

Vishay DaleIn Stock: 25816CRCW060360R4FKEA Datasheet

SimilarRFQ

ERJ-3EKF60R4V

Panasonic Electronic ComponentsIn Stock: 208953ERJ-3EKF60R4V Datasheet

SimilarRFQ

RMCF0603FG60R4

Stackpole Electronics IncIn Stock: 9882RMCF0603FG60R4 Datasheet

SimilarRFQ

RMCF0603FT60R4

Stackpole Electronics IncIn Stock: 178450RMCF0603FT60R4 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following critical parameters:

Electrical Equivalence: Resistance value (60.4 Ohms), tolerance (±1%), and power rating (0.1W) must match exactly. Temperature coefficient (±100ppm/°C) and operating temperature range (-55°C to 155°C) establish thermal performance boundaries.

Mechanical Compatibility: Package designation (0603 / 1608 Metric), physical dimensions (0.063" L x 0.031" W / 1.60mm x 0.80mm nominal), seated height (0.022" / 0.55mm maximum), and termination count (2) ensure PCB layout and assembly process compatibility.

Compliance & Environmental: RoHS3 compliance, MSL Level 1 rating, and REACH unaffected status are mandatory for substitution in regulated applications. Automotive AEC-Q200 qualification is noted where applicable but does not restrict substitution to non-automotive applications.

Packaging Format: Substitutes are grouped by delivery format (Tape & Reel vs. Cut Tape) to support manufacturing workflow requirements.

All listed substitutes meet these criteria without exception.

Parameter Comparison

Engineering Selection Recommendations

Direct Substitutes (Tape & Reel Format): CR0603-FX-60R4ELF (Bourns), RC0603FR-0760R4L (YAGEO), ERJ-3EKF60R4V (Panasonic), and RMCF0603FT60R4 (Stackpole) are electrically and mechanically equivalent to the RC1608F60R4CS with matching Tape & Reel packaging. These parts maintain identical electrical performance and environmental ratings. Selection among these options is based on supply availability, lead time, and manufacturing process compatibility.

Automotive-Qualified Alternatives: AC0603FR-0760R4L (YAGEO), CRCW060360R4FKEA (Vishay Dale), ERJ-3EKF60R4V (Panasonic), and RMCF0603FG60R4 (Stackpole) carry AEC-Q200 automotive qualification. These parts are suitable for applications requiring automotive-grade reliability and traceability. Packaging format varies (Cut Tape & Digi-Reel or Cut Tape), requiring verification against manufacturing equipment specifications.

Packaging Considerations: Tape & Reel format parts (CR0603-FX-60R4ELF, RC0603FR-0760R4L, ERJ-3EKF60R4V, RMCF0603FT60R4) are optimized for high-volume automated assembly. Cut Tape format parts (AC0603FR-0760R4L, CRCW060360R4FKEA, RMCF0603FG60R4) support lower-volume or mixed-component pick-and-place operations.

All listed substitutes maintain Active product status and full RoHS3 compliance with MSL Level 1 rating, ensuring long-term availability and regulatory alignment.

Frequently Asked Questions (FAQ)

Q: Can RC0603FR-0760R4L replace RC1608F60R4CS in my design?

A: Yes. RC0603FR-0760R4L (YAGEO) is a direct electrical and mechanical equivalent. Both parts specify 60.4 Ohms ±1%, 0.1W power rating, 0603 package, ±100ppm/°C temperature coefficient, and -55°C to 155°C operating range. RoHS3 and MSL Level 1 compliance are identical. Substitution is valid for non-automotive applications. Verify Tape & Reel packaging compatibility with your assembly equipment.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel format delivers components on continuous carrier tape wound on reels, optimized for automated high-speed pick-and-place assembly. Cut Tape format provides components on cut segments of carrier tape, suitable for lower-volume production or manual assembly workflows. Electrical and mechanical specifications are identical; packaging selection depends on manufacturing process requirements.

Q: Are AEC-Q200 qualified parts (ERJ-3EKF60R4V, RMCF0603FT60R4) required for my application?

A: AEC-Q200 qualification is mandatory only for automotive applications subject to automotive reliability standards. For general industrial, consumer, or non-automotive applications, non-qualified equivalents (CR0603-FX-60R4ELF, RC0603FR-0760R4L) are fully acceptable. All listed parts meet identical electrical specifications and RoHS3 compliance.

Q: Can I substitute CRCW060360R4FKEA (Vishay Dale) for RC1608F60R4CS?

A: Yes. CRCW060360R4FKEA meets all electrical and mechanical requirements: 60.4 Ohms ±1%, 0.1W, 0603 package, ±100ppm/°C, -55°C to 155°C. Physical dimensions are nominally equivalent (0.061" L x 0.033" W vs. 0.063" L x 0.031" W; seated height 0.020" vs. 0.022"). Verify Cut Tape & Digi-Reel packaging compatibility with your assembly process.

Q: What does MSL Level 1 mean for this resistor?

A: MSL (Moisture Sensitivity Level) 1 indicates Unlimited shelf life without moisture control requirements. The component does not require dry-pack storage or baking prior to assembly. All listed substitutes carry MSL Level 1 rating, eliminating moisture-related handling constraints.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts are RoHS3 compliant and REACH unaffected. Regulatory compliance is uniform across all options, supporting use in regulated markets without additional qualification.