RC0603F823CS Equivalent & Substitute Parts Reference

Part Overview

The RC0603F823CS is an 82 kOhms ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics, rated at 0.05W (1/20W) in a 0201 (0603 Metric) package. This component is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component, enabling direct replacement in circuit applications without design modification.

Substiute Parts

RC0603F823CS

Samsung Electro-MechanicsIn Stock: 6598RC0603F823CS Datasheet

Current PartRFQ

CRCW020182K0FKED

Vishay DaleIn Stock: 12901CRCW020182K0FKED Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC0603F823CS is determined by strict alignment of the following parameters:

• Resistance Value: 82 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power Rating: 0.05W / 1/20W (exact match required)
• Package / Case: 0201 (0603 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Physical Dimensions: 0.024" L x 0.012" W (0.60mm x 0.30mm) (exact match required)
• Terminations: 2 (exact match required)
• Compliance: RoHS3 Compliant, REACH Unaffected (minimum requirement)
• Moisture Sensitivity: MSL 1 (Unlimited) (minimum requirement)

The CRCW020182K0FKED from Vishay Dale meets all substitution criteria and is classified as a direct equivalent.

Parameter Comparison

Engineering Selection Recommendations

The CRCW020182K0FKED (Vishay Dale) is a direct substitute for the RC0603F823CS (Samsung Electro-Mechanics) based on the following engineering criteria:

Electrical Equivalence: Both components deliver identical resistance (82 kOhms), tolerance (±1%), and power dissipation (0.05W). The substitute exhibits superior temperature stability (±100ppm/°C versus ±250ppm/°C) and an extended operating temperature range (-55°C ~ 155°C versus -55°C ~ 125°C), providing enhanced performance margin in thermal environments.

Mechanical Compatibility: Identical package dimensions (0201 / 0603 Metric), physical size (0.024" x 0.012"), and seated height (0.010") ensure direct PCB footprint compatibility without layout modification.

Regulatory Compliance: Both components maintain RoHS3 compliance, REACH unaffected status, and EAR99 export classification. Moisture sensitivity rating (MSL 1 / Unlimited) and HTSUS classification (8533.21.0030) are identical, supporting equivalent supply chain and storage requirements.

Product Status: Both components are classified as Active, ensuring continued availability and manufacturing support.

Frequently Asked Questions (FAQ)

Q: Can the CRCW020182K0FKED replace the RC0603F823CS in existing designs?

A: Yes. The CRCW020182K0FKED meets all electrical and mechanical substitution criteria. Identical resistance, tolerance, power rating, package, and physical dimensions enable direct replacement without circuit redesign or PCB modification.

Q: Are there differences in temperature performance between these components?

A: The CRCW020182K0FKED exhibits superior temperature characteristics. Its temperature coefficient (±100ppm/°C) is lower than the RC0603F823CS (±250ppm/°C), and its operating range extends to 155°C versus 125°C. These differences represent performance advantages in thermally demanding applications.

Q: Do both components meet the same compliance standards?

A: Yes. Both the RC0603F823CS and CRCW020182K0FKED are RoHS3 compliant, REACH unaffected, and classified as EAR99 for export purposes. Moisture sensitivity levels (MSL 1) and tariff classifications (HTSUS 8533.21.0030) are identical.

Q: What packaging options are available for the substitute part?

A: The CRCW020182K0FKED is supplied in Cut Tape (CT) and Digi-Reel® packaging formats, providing flexibility for both manual assembly and automated reel-fed production processes.

Q: Are there any design considerations when switching between these manufacturers?

A: No design modifications are required. Both components are thick film 0201 chip resistors with identical electrical specifications and mechanical form factors. Substitution is direct at the component level.