Equivalent & Substitute Parts for RC0402F330CS

Part Overview

The RC0402F330CS is a 33 Ohm ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics, rated at 0.03W (1/32W) in the 01005 (0402 Metric) package. This component is classified as Active product status and is RoHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component, enabling direct replacement in circuit applications without design modification.

Substiute Parts

RC0402F330CS

Samsung Electro-MechanicsIn Stock: 7883RC0402F330CS Datasheet

Current PartRFQ

RC0100FR-0733RL

YAGEOIn Stock: 5930RC0100FR-0733RL Datasheet

UpgradeRFQ

CRCW010033R0FREL

Vishay DaleIn Stock: 16002CRCW010033R0FREL Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC0402F330CS is determined by strict alignment of the following parameters:

Critical Electrical Parameters:

• Resistance value: 33 Ohms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.03W / 1/32W (exact match required)
• Composition: Thick Film (exact match required)

Critical Mechanical Parameters:

• Package / Case: 01005 (0402 Metric) (exact match required)
• Physical dimensions: 0.016" L x 0.008" W / 0.40mm x 0.20mm (exact match required)
• Height - Seated (Max): 0.006" / 0.15mm (exact match required)
• Number of Terminations: 2 (exact match required)

Critical Compliance Parameters:

• Operating Temperature Range: -55°C ~ 125°C (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)
• Moisture Sensitivity Level (MSL): 1 (Unlimited) (exact match required)

All identified substitute parts meet these criteria and are classified as either Upgrade or Similar substitutes based on manufacturer and series designation.

Parameter Comparison

Engineering Selection Recommendations

All three components—RC0402F330CS, RC0100FR-0733RL, and CRCW010033R0FREL—are Active product status and meet identical electrical, mechanical, and compliance requirements. Selection between these parts is based on the following factors:

Packaging Format: The RC0402F330CS is supplied in Cut Tape (CT) format, while RC0100FR-0733RL and CRCW010033R0FREL are supplied in Tape & Reel (TR) format. Packaging selection depends on assembly process requirements and volume specifications.

Temperature Coefficient Variance: The RC0402F330CS and CRCW010033R0FREL both specify ±250ppm/°C temperature coefficient, while RC0100FR-0733RL specifies ±300ppm/°C. This variance remains within acceptable substitution parameters for applications where temperature stability is not a critical design constraint.

Compliance Certifications: All three parts are ROHS3 compliant, REACH Unaffected, and classified under ECCN EAR99 with identical HTSUS coding (8533.21.0030). All components carry MSL 1 (Unlimited) moisture sensitivity rating and operate across the identical temperature range of -55°C to 125°C.

Inventory Availability: Current stock levels are RC0402F330CS (7809 Pcs), RC0100FR-0733RL (5843 Pcs), and CRCW010033R0FREL (15965 Pcs).

Frequently Asked Questions (FAQ)

Q: Can RC0100FR-0733RL directly replace RC0402F330CS in existing circuit designs?

A: Yes. Both components share identical resistance (33 Ohms), tolerance (±1%), power rating (0.03W / 1/32W), package dimensions (01005 / 0402 Metric), and operating temperature range (-55°C ~ 125°C). The primary difference is packaging format (Cut Tape versus Tape & Reel) and a minor temperature coefficient variance (±250ppm/°C versus ±300ppm/°C), which does not affect direct substitution eligibility.

Q: What is the significance of the temperature coefficient difference between RC0402F330CS and RC0100FR-0733RL?

A: The RC0402F330CS specifies ±250ppm/°C while RC0100FR-0733RL specifies ±300ppm/°C. Both values remain within acceptable thick film resistor specifications. The 50ppm/°C difference is negligible for most general-purpose applications. Applications requiring precise temperature stability should confirm this parameter against circuit design requirements.

Q: Are all three parts RoHS3 compliant?

A: Yes. RC0402F330CS, RC0100FR-0733RL, and CRCW010033R0FREL are all ROHS3 compliant with REACH Unaffected status and EAR99 export classification.

Q: What is the difference between Cut Tape (CT) and Tape & Reel (TR) packaging?

A: Cut Tape (CT) packaging is supplied in individual tape segments suitable for manual or small-scale assembly operations. Tape & Reel (TR) packaging is supplied on continuous reels optimized for automated pick-and-place assembly equipment. Selection depends on production volume and assembly process capabilities.

Q: Do all substitute parts carry the same moisture sensitivity level?

A: Yes. All three components—RC0402F330CS, RC0100FR-0733RL, and CRCW010033R0FREL—are rated MSL 1 (Unlimited), indicating no moisture sensitivity restrictions and unlimited shelf life under standard storage conditions.

Q: Can CRCW010033R0FREL be used as a substitute for RC0402F330CS?

A: Yes. CRCW010033R0FREL meets all critical electrical, mechanical, and compliance parameters. Both components specify identical resistance (33 Ohms), tolerance (±1%), power rating (0.03W / 1/32W), package type (01005 / 0402 Metric), and temperature coefficient (±250ppm/°C). The primary difference is manufacturer (Vishay Dale versus Samsung Electro-Mechanics) and packaging format (Tape & Reel versus Cut Tape).