BNC Connector Plug R141083000 Equivalent & Substitute Parts

Part Overview

The R141083000 is an active BNC connector plug manufactured by Radiall USA, Inc., designed for coaxial RF applications requiring 50 Ohm impedance. This male pin, free-hanging crimp-type connector operates across a frequency range up to 4 GHz and supports cable groups RG-142, RG-223, and RG-400. The component is ROHS3 compliant and REACH affected, making it suitable for regulated industrial and telecommunications applications. Substitute parts are identified based on matching electrical specifications, mechanical compatibility, and termination methods.

Substiute Parts

R141083000

Radiall USA, Inc.In Stock: 1095R141083000 Datasheet

Current PartRFQ

R141083000W

Radiall USA, Inc.In Stock: 938R141083000W Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the R141083000 are identified based on strict electrical and mechanical parameter matching. The primary substitution criterion is functional equivalence across the following parameters:

• Connector Style: BNC
• Connector Type: Plug, Male Pin
• Contact Termination: Crimp
• Shield Termination: Crimp
• Impedance: 50 Ohms
• Mounting Type: Free Hanging (In-Line)
• Cable Group Compatibility: RG-142, RG-223, RG-400
• Fastening Type: Bayonet Lock
• Frequency Rating: 4 GHz maximum
• Operating Temperature Range: -65°C to 165°C
• Voltage Rating: 500 V
• Mating Cycles: 500

The R141083000W is classified as a parametric equivalent because it matches all critical electrical and mechanical specifications. The primary difference is packaging format (Bulk versus Box), which does not affect functional performance or compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both R141083000 and R141083000W are active products from Radiall USA, Inc., with identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements and inventory availability rather than functional performance.

The R141083000 is supplied in Bulk packaging with 986 units in stock. The R141083000W is supplied in Box packaging with 928 units in stock. Both parts maintain ROHS3 compliance and REACH affected status, ensuring regulatory compatibility in controlled environments.

For applications requiring specific packaging formats or inventory management protocols, either part is functionally interchangeable without modification to circuit design or assembly procedures.

Frequently Asked Questions (FAQ)

Q: Can R141083000W be used as a direct replacement for R141083000?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Bulk versus Box). No circuit modifications or assembly changes are required.

Q: What cable types are compatible with these connectors?

A: Both connectors support RG-142, RG-223, and RG-400 cable groups. Ensure cable selection matches the specified impedance of 50 Ohms.

Q: Are there any compliance differences between the two parts?

A: No. Both parts are ROHS3 compliant and REACH affected. Regulatory status is identical.

Q: What is the maximum operating frequency for these connectors?

A: The maximum frequency rating is 4 GHz for both R141083000 and R141083000W.

Q: How many mating cycles are rated for these connectors?

A: Both connectors are rated for 500 mating cycles under normal operating conditions.

Q: What is the operating temperature range?

A: Both connectors operate across -65°C to 165°C, suitable for industrial and telecommunications applications.

Q: Does packaging affect connector performance?

A: No. Packaging format (Bulk or Box) does not affect electrical performance, mechanical compatibility, or reliability. Selection should be based on procurement and inventory requirements.