PVR3301N Equivalent & Substitute Parts Reference

Part Overview

The Infineon Technologies PVR3301N is a solid state relay configured as DPST-NO (2 Form A) x 2, with a maximum load current of 165 mA and an on-state resistance of 24 Ohms, housed in a 16-DIP (0.300", 7.62mm), 10-lead through hole package. The part is now classified as obsolete. Identifying suitable equivalent or substitute parts is critical for maintaining systems that specify PVR3301N and ensuring continued manufacturability and serviceability, especially given inventory constraints and lifecycle management requirements.

Substiute Parts

PVR3301N

Infineon TechnologiesIn Stock: 3005PVR3301N Datasheet

Current PartRFQ

AQW210EH

Panasonic Electric WorksIn Stock: 19047AQW210EH Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is determined by exact matches or functional similarity in the following electrical and mechanical parameters: relay type and configuration, load voltage and current, on-state resistance, package/case type, mounting style, termination, and regulatory status. The allowed variations are limited to those explicitly included in the main and substitute part descriptions. Only parts explicitly listed as substitutes in the provided input are considered valid equivalents.

Key parameters for substitution:

• Function (solid state relay, AC/DC output)
• Circuit configuration (Form A, number of poles)
• Package/case (through hole DIP characteristics)
• Voltage - Load
• Load current
• On-state resistance (Max)
• RoHS and compliance status

Parameter Comparison

Engineering Selection Recommendations

The Infineon Technologies PVR3301N is obsolete and is not RoHS compliant. The Panasonic Electric Works AQW210EH is an active part and is ROHS3 compliant. Selection between these relays should consider RoHS and status requirements. Both parts are unaffected by REACH and meet EAR99 export controls and HTSUS classifications as provided. Moisture Sensitivity Level differs; AQW210EH is listed as Not Applicable, versus 1 (Unlimited) for PVR3301N.

Frequently Asked Questions (FAQ)

Q1: What are the critical parameters to check for substituting the PVR3301N with AQW210EH?
A1: The critical parameters are relay function (solid state, AC/DC), Form A circuit configuration, load voltage and current ratings, package/case type, and compliance status.

Q2: Are the package and pinout the same between PVR3301N and AQW210EH?
A2: PVR3301N is in a 16-DIP (0.300", 7.62mm), 10 lead package, while AQW210EH is in an 8-DIP (0.300", 7.62mm) package. Physical dimensions are similar, but lead and pin counts differ.

Q3: Does the substitute AQW210EH comply with RoHS?
A3: AQW210EH is ROHS3 compliant; PVR3301N is RoHS non-compliant.

Q4: How do load ratings compare between PVR3301N and AQW210EH?
A4: PVR3301N supports up to 165 mA and 0–300 V; AQW210EH supports up to 120 mA and 0–350 V.

Q5: Are regulatory certifications and export codes identical?
A5: Both parts are classified as EAR99 and have the same HTSUS code (8536.41.0030). Both are REACH unaffected per input data.