PVN012S-T Equivalent & Substitute Parts

Part Overview

The PVN012S-T is a solid-state relay (SSR) manufactured by Infineon Technologies, configured as a SPST-NO (Single Pole Single Throw - Normally Open) switching device. This component operates with a 1.2VDC input signal and supports load voltages from 0V to 20V at a maximum current of 2.5A, with an on-state resistance of 100 mOhms maximum. The device is packaged in a 6-SMD surface mount configuration with gull wing termination.

The PVN012S-T carries an obsolete product status, making it necessary to identify functionally equivalent alternatives for new designs and ongoing production requirements. The substitute part PVN012S-TPBF maintains identical electrical and mechanical specifications while offering active product status and improved compliance certifications.

Substiute Parts

PVN012S-T

Infineon TechnologiesIn Stock: 4075PVN012S-T Datasheet

Current PartRFQ

PVN012S-TPBF

Infineon TechnologiesIn Stock: 6081PVN012S-TPBF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The PVN012S-TPBF qualifies as a direct substitute for the PVN012S-T based on strict electrical and mechanical parameter equivalence. Substitution is valid when the following criteria are met:

• Identical circuit configuration: SPST-NO (1 Form A)
• Identical output type: AC, DC
• Identical input voltage: 1.2VDC
• Identical load voltage range: 0V ~ 20V
• Identical load current rating: 2.5A
• Identical on-state resistance: 100 mOhms maximum
• Identical package and termination: 6-SMD (0.300", 7.62mm) with gull wing leads
• Identical mounting type: Surface Mount
• Identical moisture sensitivity level: MSL 4 (72 Hours)

The PVN012S-TPBF maintains all specified electrical and mechanical parameters without deviation, confirming direct substitutability in applications designed for the PVN012S-T.

Parameter Comparison

Engineering Selection Recommendations

The PVN012S-TPBF is the appropriate selection for new designs and production applications. While the PVN012S-T remains functionally equivalent in all electrical and mechanical parameters, its obsolete product status creates supply chain risk and limits long-term availability.

The PVN012S-TPBF offers the additional advantage of ROHS3 compliance, meeting current regulatory requirements for electronic components in regulated markets. Both parts maintain identical REACH unaffected status and EAR99 export classification.

For applications requiring the PVN012S-T, transition to PVN012S-TPBF without design modification, as all specified parameters remain unchanged.

Frequently Asked Questions (FAQ)

Q: Can PVN012S-TPBF replace PVN012S-T in existing designs?

A: Yes. The PVN012S-TPBF is a direct substitute with identical electrical specifications (1.2VDC input, 0-20V load voltage, 2.5A current rating, 100 mOhms on-state resistance) and mechanical configuration (6-SMD package, gull wing termination, surface mount). No circuit modifications are required.

Q: What is the difference between PVN012S-T and PVN012S-TPBF?

A: The primary differences are product status and compliance certification. PVN012S-T is obsolete with RoHS non-compliant status. PVN012S-TPBF is active with ROHS3 compliance. All functional parameters are identical.

Q: Are there any package or pinout differences?

A: No. Both parts use the identical 6-SMD (0.300", 7.62mm) package with gull wing termination. PCB layout and assembly processes remain unchanged.

Q: What is the moisture sensitivity level for these parts?

A: Both PVN012S-T and PVN012S-TPBF carry MSL 4 rating, requiring storage at 72 hours maximum exposure to ambient conditions before reflow soldering.

Q: Can these parts switch both AC and DC loads?

A: Yes. Both parts are rated for AC and DC output types across the 0V to 20V load voltage range at 2.5A maximum current.