PVC6H200A01B00 Equivalent & Substitute Parts

Part Overview

The PVC6H200A01B00 is a 20 Ohm, 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. with ceramic resistive material, side adjustment, and PC pin termination. This component is classified as obsolete, making equivalent substitute parts necessary for ongoing production and maintenance applications. The part operates with ±10% tolerance and ±100ppm/°C temperature coefficient across a single turn adjustment range.

Substiute Parts

PVC6H200A01B00

Bourns Inc.In Stock: 963PVC6H200A01B00 Datasheet

Current PartRFQ

3362X-1-200LF

Bourns Inc.In Stock: 10053362X-1-200LF Datasheet

DirectRFQ

FT-63EH200

Nidec Components CorporationIn Stock: 805FT-63EH200 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by matching the following critical parameters: resistance value (20 Ohms), power rating (0.5W), tolerance (±10%), number of turns (1), adjustment type (side adjustment), mounting type (through hole), and termination style (PC pins). Both substitute parts meet these core electrical and mechanical requirements. The 3362X-1-200LF represents a direct manufacturer equivalent from Bourns Inc. with active product status and improved compliance. The FT-63EH200 from Nidec Components Corporation provides an alternative from a different manufacturer with comparable electrical performance and active availability.

Parameter Comparison

Engineering Selection Recommendations

The 3362X-1-200LF is the primary substitute for the PVC6H200A01B00. Both components are manufactured by Bourns Inc., ensuring design continuity and compatibility. The 3362X-1-200LF carries active product status, ROHS3 compliance, and is available in higher inventory quantities. The transition from ceramic to cermet resistive material maintains electrical performance within specified tolerances.

The FT-63EH200 from Nidec Components Corporation serves as a secondary alternative. This part maintains all critical electrical parameters and mechanical compatibility. The temperature coefficient specification of ±150ppm/°C is slightly higher than the original ±100ppm/°C, which remains within acceptable operational ranges for most applications. The FT-63EH200 is ROHS3 compliant and REACH unaffected, with active product status and established supply availability.

Frequently Asked Questions (FAQ)

Q: Can the 3362X-1-200LF directly replace the PVC6H200A01B00 in existing designs?

A: Yes. The 3362X-1-200LF matches all critical electrical specifications (20 Ohms, 0.5W, ±10% tolerance, ±100ppm/°C) and mechanical requirements (side adjustment, through-hole mounting, PC pins). Minor dimensional differences (0.275" x 0.260" versus 0.315" x 0.272") require PCB layout verification to ensure clearance compatibility.

Q: What is the difference between ceramic and cermet resistive materials in these trimmers?

A: Both materials are provided in the specifications. Ceramic material is used in the PVC6H200A01B00, while cermet is used in both substitute parts. The electrical performance remains equivalent within the specified tolerance and temperature coefficient ranges for this application.

Q: Is the FT-63EH200 suitable for applications requiring strict temperature stability?

A: The FT-63EH200 specifies ±150ppm/°C temperature coefficient compared to ±100ppm/°C for the original part. This difference must be evaluated against application requirements. For temperature-sensitive circuits, the 3362X-1-200LF with ±100ppm/°C is the preferred choice.

Q: What are the packaging differences between these parts?

A: The PVC6H200A01B00 is supplied in standard packaging. The 3362X-1-200LF is packaged in tubes, while the FT-63EH200 is supplied in bulk. Packaging selection depends on production volume and handling requirements.

Q: Are there compliance considerations when switching from the PVC6H200A01B00?

A: Yes. The original part is RoHS non-compliant. Both substitute parts are ROHS3 compliant, making them suitable for applications requiring RoHS certification. The 3362X-1-200LF is REACH affected, while the FT-63EH200 is REACH unaffected. Regulatory requirements for your application should guide the final selection.