PVC6H100A01B00 Equivalent & Substitute Parts

Part Overview

The PVC6H100A01B00 is a 10 Ohm, 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. with ceramic resistive material, side adjustment, and PC pin termination. This part is classified as obsolete, making identification of suitable substitute components essential for ongoing production and maintenance applications. The primary driver for substitution is the discontinued product status, which necessitates sourcing functionally equivalent alternatives that maintain electrical and mechanical compatibility with existing designs.

Substiute Parts

PVC6H100A01B00

Bourns Inc.In Stock: 906PVC6H100A01B00 Datasheet

Current PartRFQ

3362X-1-100LF

Bourns Inc.In Stock: 10673362X-1-100LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PVC6H100A01B00 is determined by strict equivalence across the following critical parameters:

• Resistance value: 10 Ohms (exact match required)
• Power rating: 0.5W minimum
• Tolerance: ±10% or better
• Temperature coefficient: ±100ppm/°C or better
• Number of turns: 1.0 Turn
• Adjustment type: Side Adjustment
• Mounting type: Through Hole
• Termination style: PC Pins
• Physical form factor: Rectangular configuration

The substitute part 3362X-1-100LF meets all these criteria. While the resistive material differs (cermet vs. ceramic) and physical dimensions are slightly smaller, these variations remain within acceptable substitution parameters for this component category. The cermet material in the substitute provides equivalent electrical performance at the specified resistance and power rating.

Parameter Comparison

Engineering Selection Recommendations

The 3362X-1-100LF serves as the direct substitute for the obsolete PVC6H100A01B00. Selection of this substitute is supported by the following factors:

All critical electrical parameters match exactly: 10 Ohm resistance, 0.5W power rating, ±10% tolerance, and ±100ppm/°C temperature coefficient. The 1.0 turn side-adjustment through-hole configuration with PC pin termination provides mechanical and functional equivalence.

The substitute part maintains active product status with Bourns Inc., ensuring long-term availability and supply chain continuity. The 3362X-1-100LF is ROHS3 compliant, representing an improvement over the non-compliant original part for applications subject to environmental regulations.

Physical dimensions are comparable, with the substitute measuring 0.275" x 0.260" (6.99mm x 6.60mm) versus the original 0.315" x 0.272" (8.00mm x 6.90mm). The slightly smaller footprint may require PCB layout verification for existing designs, though the reduction is minimal and typically accommodated within standard component spacing tolerances.

Frequently Asked Questions (FAQ)

Q: Can the 3362X-1-100LF replace the PVC6H100A01B00 in existing designs?

A: Yes. The substitute matches all critical electrical specifications: 10 Ohm resistance, 0.5W power rating, ±10% tolerance, ±100ppm/°C temperature coefficient, 1.0 turn side adjustment, through-hole mounting, and PC pin termination. PCB layout should be verified due to the slightly smaller physical dimensions.

Q: What is the difference between ceramic and cermet resistive materials in this application?

A: Both materials provide equivalent electrical performance at the specified 10 Ohm resistance and 0.5W power rating. Cermet material in the 3362X-1-100LF offers improved stability and reliability characteristics typical of sealed trimmer potentiometers.

Q: Is the 3362X-1-100LF available in the same packaging as the original part?

A: The original PVC6H100A01B00 packaging is not specified in available data. The 3362X-1-100LF is supplied in tube packaging. Confirm packaging requirements with your procurement department.

Q: Does the smaller size of the 3362X-1-100LF affect circuit performance?

A: No. Physical size reduction does not impact electrical performance. All functional parameters remain equivalent. PCB layout accommodation should be verified for existing designs.

Q: What is the compliance status difference between these parts?

A: The PVC6H100A01B00 is RoHS non-compliant. The 3362X-1-100LF is ROHS3 compliant, meeting current environmental regulations for new designs and applications subject to RoHS requirements.