PV18-8F-E Equivalent & Substitute Parts

Part Overview

The PV18-8F-E is a red insulated spade terminal connector manufactured by Panduit Corp, designed for crimp termination of 18-22 AWG wire onto an 8 stud. This connector features a brazed seam construction with serrated termination and tin-plated copper contact material. The part is classified as obsolete, necessitating identification of active equivalent alternatives for continued procurement and system maintenance.

Substiute Parts

PV18-8F-E

Panduit CorpIn Stock: 978PV18-8F-E Datasheet

Current PartRFQ

PV18-8F-CY

Panduit CorpIn Stock: 1194PV18-8F-CY Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PV18-8F-E is determined by strict equivalence across the following critical parameters:

• Stud/Tab Size: 8 Stud (electrical and mechanical interface requirement)
• Wire Gauge Range: 18-22 AWG (conductor compatibility)
• Termination Method: Crimp (assembly process compatibility)
• Insulation Material: Vinyl (environmental and electrical properties)
• Contact Material and Finish: Copper with tin plating (conductivity and corrosion resistance)
• Mounting Configuration: Free Hanging (In-Line) (physical installation compatibility)
• Color Coding: Red (circuit identification standard)

The substitute part PV18-8F-CY meets all these parameters identically. The primary distinction between the main part and its substitute is product status and packaging configuration.

Parameter Comparison

Engineering Selection Recommendations

The PV18-8F-CY is the direct functional equivalent of the PV18-8F-E. Both parts are manufactured by Panduit Corp within the Pan-Term® series and share identical electrical and mechanical specifications across all critical parameters.

Product Status Consideration: The PV18-8F-E is classified as obsolete, while the PV18-8F-CY maintains active product status. For new designs, system upgrades, and ongoing procurement, the PV18-8F-CY is the appropriate selection.

Compliance: Both parts maintain ROHS3 compliance. The PV18-8F-CY includes documented REACH Unaffected status, providing additional regulatory clarity for international applications.

Packaging: The PV18-8F-CY is supplied in bulk packaging, which may require evaluation against specific procurement and inventory management requirements.

Frequently Asked Questions (FAQ)

Q: Can PV18-8F-CY be used as a direct replacement for PV18-8F-E in existing assemblies?

A: Yes. The PV18-8F-CY is electrically and mechanically equivalent to the PV18-8F-E. All critical parameters including stud size, wire gauge range, termination method, insulation material, contact material, and physical dimensions are identical.

Q: What is the primary reason for substitution?

A: The PV18-8F-E is obsolete. The PV18-8F-CY is the active equivalent part from the same manufacturer and series, ensuring continued availability and supply chain reliability.

Q: Are there any differences in performance or reliability between these parts?

A: No performance or reliability differences exist. Both parts feature identical construction (brazed seam, serrated termination), material composition (tin-plated copper contacts, vinyl insulation), and dimensional specifications.

Q: Does packaging affect the substitution decision?

A: Packaging format differs between the parts. The PV18-8F-E packaging is not specified, while the PV18-8F-CY is supplied in bulk. Packaging selection should be based on procurement volume and inventory management requirements, not on electrical or mechanical compatibility.

Q: Are both parts RoHS compliant?

A: Yes. Both the PV18-8F-E and PV18-8F-CY are ROHS3 compliant. The PV18-8F-CY additionally carries REACH Unaffected status.

Q: What wire gauges are compatible with these terminals?

A: Both parts accommodate 18-22 AWG wire. This range must be observed during termination to ensure proper crimp contact and electrical performance.

Q: Is the 8 stud size standardized across manufacturers?

A: The 8 stud designation is specific to the terminal design. Substitution requires exact stud size matching. The PV18-8F-CY maintains the identical 8 stud configuration as the PV18-8F-E.