PS-10PE-D4T2-M2AE Equivalent & Substitute Parts

Part Overview

The PS-10PE-D4T2-M2AE is a rectangular connector header manufactured by JAE Electronics, designed for through-hole mounting applications. This connector features a 10-position, 2-row configuration with 0.100" (2.54mm) pitch spacing and shrouded 4-wall design. The part is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing design support and procurement planning.

Substiute Parts

PS-10PE-D4T2-M2AE

JAE ElectronicsIn Stock: 1091PS-10PE-D4T2-M2AE Datasheet

Current PartRFQ

PS-10PE-D4T1-M1AE

JAE ElectronicsIn Stock: 1089PS-10PE-D4T1-M1AE Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PS-10PE-D4T2-M2AE is determined by strict alignment of the following electrical and mechanical parameters:

• Connector type (Header)
• Contact type (Male Pin)
• Number of positions (10)
• Number of rows (2)
• Pitch spacing (0.100" / 2.54mm)
• Row spacing (0.100" / 2.54mm)
• Mounting type (Through Hole)
• Shrouding configuration (Shrouded - 4 Wall)
• Termination method (Solder)
• Insulation material (PBT)
• Contact finish materials (Gold mating surface, Tin post)

The PS-10PE-D4T1-M1AE meets all substitution criteria within the PS series family, maintaining identical mechanical and electrical interface specifications while offering active product status and improved availability.

Parameter Comparison

Engineering Selection Recommendations

The PS-10PE-D4T1-M1AE is a direct functional equivalent for the obsolete PS-10PE-D4T2-M2AE. Both connectors share identical mechanical and electrical interface specifications, ensuring pin-for-pin compatibility in board-level applications.

The substitute part offers the advantage of active product status with higher current inventory availability (1043 units in stock versus 986 units). Both parts maintain UL94 V-0 flammability compliance and MSL 1 moisture sensitivity classification, suitable for standard industrial and commercial applications.

The PS-10PE-D4T1-M1AE is RoHS compliant, providing additional regulatory alignment for modern supply chain requirements.

Frequently Asked Questions (FAQ)

Q: Are PS-10PE-D4T2-M2AE and PS-10PE-D4T1-M1AE mechanically interchangeable?

A: Yes. Both connectors maintain identical pitch spacing (0.100" / 2.54mm), row configuration (2 rows, 10 positions), mounting type (through-hole), and shrouding design (4-wall). PCB footprints are identical.

Q: What are the differences between these two part numbers?

A: The primary differences are product status (obsolete versus active) and contact post length specifications. PS-10PE-D4T2-M2AE has a contact post length of 0.130" (3.30mm), while PS-10PE-D4T1-M1AE has 0.110" (2.79mm). Both are within standard tolerance ranges for this connector family and do not affect functional compatibility.

Q: Can I use PS-10PE-D4T1-M1AE as a direct replacement in existing designs?

A: Yes. The substitute part meets all electrical and mechanical requirements for direct substitution. No design modifications are required.

Q: What is the packaging difference?

A: PS-10PE-D4T2-M2AE is supplied in standard packaging, while PS-10PE-D4T1-M1AE is supplied in bulk packaging. This does not affect component functionality or performance.

Q: Are both parts RoHS compliant?

A: PS-10PE-D4T1-M1AE is explicitly RoHS compliant. RoHS status for PS-10PE-D4T2-M2AE is not specified in available documentation.