PPZC10100 Equivalent & Substitute Parts

Part Overview

The PPZC10100 is a 9–100pF trimmer capacitor manufactured by Passive Plus under the FILMTRIM® series. This through-hole component features polycarbonate dielectric material, top and bottom adjustment capability, and is rated for 100V operation across an extended temperature range of –40°C to 85°C. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and design continuity when the primary part becomes unavailable or when alternative mechanical configurations are acceptable within system constraints.

Substiute Parts

PPZC10100

Passive PlusIn Stock: 1820PPZC10100 Datasheet

Current PartRFQ

PPZC10103

Passive PlusIn Stock: 1240PPZC10103 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PPZC10100 is determined by strict equivalence across the following critical parameters:

• Capacitance Range: 9–100pF (must match exactly)
• Voltage Rating: 100V (must match or exceed)
• Dielectric Material: Polycarbonate (PC) (must match)
• Adjustment Type: Top and Bottom (must match)
• Mounting Type: Through Hole (must match)
• Operating Temperature Range: –40°C to 85°C (must match or exceed)
• Q Factor: 200 @ 1MHz (must match or exceed)
• Compliance: RoHS3 Compliant, MSL 1 (must match)

The PPZC10103 qualifies as a parametric equivalent because it maintains identical electrical specifications, dielectric composition, adjustment capability, mounting configuration, temperature performance, and regulatory compliance. The mechanical difference—height-seated maximum of 0.449" (11.40mm) with a 9.5mm adjustment dimension versus the 10.00mm dimension of the PPZC10100—does not affect electrical performance and remains within acceptable mechanical tolerances for standard through-hole PCB applications.

Parameter Comparison

Engineering Selection Recommendations

Both PPZC10100 and PPZC10103 are Active products manufactured by Passive Plus within the FILMTRIM® series and maintain full RoHS3 compliance with MSL 1 rating. Selection between these parts should be based on:

1. Inventory Availability: PPZC10100 has 1760 pcs in stock; PPZC10103 has 1153 pcs in stock. Either part supports immediate procurement.

2. Mechanical Fit: Both parts share identical diameter (0.394" / 10.00mm) and height (0.449" / 11.40mm) specifications. The adjustment dimension difference (10.00mm vs. 9.5mm) does not affect electrical performance or standard PCB mounting compatibility.

3. Electrical Equivalence: Identical capacitance range, voltage rating, dielectric material, Q factor, and temperature performance ensure direct functional substitution in circuit applications.

4. Regulatory Compliance: Both parts meet RoHS3 requirements and carry unlimited moisture sensitivity rating, suitable for standard industrial and commercial applications without additional handling precautions.

Frequently Asked Questions (FAQ)

Q: Can PPZC10103 replace PPZC10100 in existing designs?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, dielectric composition, voltage rating, capacitance range, adjustment type, mounting configuration, and operating temperature range. No circuit redesign is required.

Q: What is the difference between PPZC10100 and PPZC10103?

A: The primary difference is the adjustment dimension: PPZC10100 specifies 10.00mm adjustment, while PPZC10103 specifies 9.5mm adjustment. Both maintain the same overall diameter and height. This mechanical variation does not affect electrical performance or standard through-hole PCB compatibility.

Q: Are both parts RoHS3 compliant?

A: Yes. Both PPZC10100 and PPZC10103 are RoHS3 compliant with MSL 1 (unlimited moisture sensitivity), suitable for standard manufacturing and storage environments.

Q: What is the operating temperature range for these parts?

A: Both parts operate across –40°C to 85°C, supporting extended industrial and commercial temperature requirements.

Q: Can these trimmer capacitors be used interchangeably in high-frequency applications?

A: Yes. Both parts maintain identical Q factor performance (200 @ 1MHz) and polycarbonate dielectric characteristics, supporting equivalent high-frequency circuit performance.

Q: What mounting type do these parts use?

A: Both PPZC10100 and PPZC10103 are through-hole components designed for standard PCB mounting with lead insertion into plated holes.