PL5.0-10-130B Equivalent & Substitute Parts

Part Overview

The PL5.0-10-130B is a laminated core power transformer manufactured by Tamura, rated at 5VA with dual primary and secondary windings. This through-hole mounted component is designed for applications requiring flexible voltage configurations through parallel or series winding connections. The part is currently in active production status with RoHS compliance and unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and regulatory compliance can be maintained across alternative manufacturers while preserving the core functional specifications required for the application.

Substiute Parts

PL5.0-10-130B

TamuraIn Stock: 897PL5.0-10-130B Datasheet

Current PartRFQ

VPP10-500

Triad MagneticsIn Stock: 3154VPP10-500 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PL5.0-10-130B is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Requirements:

• Identical power rating: 5VA
• Matching primary voltage inputs: 115V and 230V dual configuration
• Matching secondary voltage outputs: 5V (parallel) and 10V (series)
• Matching output current capacity: 1A (parallel) and 500mA (series)
• Dual primary and dual secondary winding configuration
• Isolation voltage rating of 3500Vrms or higher

Mechanical Compatibility Requirements:

• Through-hole mounting type
• PC pin termination style
• Physical dimensions compatible with PCB footprint spacing

Regulatory Compliance Requirements:

• RoHS compliance status (RoHS Compliant or ROHS3 Compliant acceptable)
• ECCN and HTSUS classification alignment

The VPP10-500 manufactured by Triad Magnetics meets all electrical equivalence criteria, mechanical compatibility requirements, and regulatory compliance standards, qualifying it as a direct substitute for the PL5.0-10-130B.

Parameter Comparison

Engineering Selection Recommendations

Primary Part Selection (PL5.0-10-130B): The PL5.0-10-130B remains the specified component when original manufacturer continuity, existing inventory management, or established supply chain relationships are required. This part maintains active production status with RoHS compliance and unlimited moisture sensitivity rating.

Substitute Part Selection (VPP10-500): The VPP10-500 is electrically and mechanically equivalent to the PL5.0-10-130B and is suitable for direct substitution in applications where:

• Equivalent electrical performance is the primary requirement
• Regulatory compliance (ROHS3) is acceptable
• Physical dimensions (smaller width and height) do not conflict with PCB layout constraints
• Supply chain flexibility or inventory availability favors the Triad Magnetics part

Both parts carry identical ECCN (EAR99) and HTSUS (8504.31.4035) classifications, confirming regulatory equivalence for export and tariff purposes.

Frequently Asked Questions (FAQ)

Q: Can the VPP10-500 be used as a direct replacement for the PL5.0-10-130B in existing designs?

A: Yes. The VPP10-500 provides electrical equivalence across all specified parameters: 5VA power rating, dual 115V/230V primary inputs, dual 5V/10V secondary outputs, and matching current ratings. Both parts use laminated cores, through-hole mounting, and PC pin termination. Physical dimensions of the VPP10-500 are equal or smaller, reducing PCB footprint requirements.

Q: Are there any compliance differences between these parts?

A: Both parts are RoHS compliant. The PL5.0-10-130B carries RoHS Compliant status, while the VPP10-500 carries ROHS3 Compliant status. Both share identical ECCN (EAR99) and HTSUS (8504.31.4035) classifications. The VPP10-500 isolation voltage rating (4000Vrms) exceeds the PL5.0-10-130B specification (3500Vrms).

Q: What are the physical dimension differences?

A: Length is identical at 41.28mm. The VPP10-500 is 3.05mm narrower (33.32mm vs. 36.37mm width) and 0.67mm shorter (34.93mm vs. 35.60mm height). These smaller dimensions may provide layout advantages in space-constrained applications.

Q: Are the winding configurations identical?

A: Yes. Both parts feature dual primary windings and dual secondary windings, enabling identical voltage configuration options: parallel 5V at 1A or series 10V at 500mA.

Q: What is the inventory status for each part?

A: The PL5.0-10-130B has 789 pieces in stock (new original). The VPP10-500 has 3123 pieces in stock (new original), providing greater availability for immediate procurement.

Q: Can these parts be used interchangeably in the same PCB design?

A: Yes, provided that the smaller physical dimensions of the VPP10-500 do not create layout conflicts. The identical length and reduced width/height make the VPP10-500 compatible with existing through-hole footprints designed for the PL5.0-10-130B.