PAA.M1.0GL.AC65B Equivalent & Substitute Parts

Part Overview

The PAA.M1.0GL.AC65B is a 10-position circular connector plug with male pins and solder cup termination, manufactured by LEMO. This connector is designed for applications requiring reliable circular connection interfaces in automotive, industrial, medical, and testing equipment environments. The part is currently active in production with 1018 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design flexibility permits component interchange.

Substiute Parts

PAA.M1.0GL.AC65B

LEMOIn Stock: 1064PAA.M1.0GL.AC65B Datasheet

Current PartRFQ

S11MA7-P10MCC0-6530

ODUIn Stock: 816S11MA7-P10MCC0-6530 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PAA.M1.0GL.AC65B is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: Plug, Male Pins
• Number of Positions: 10
• Termination: Solder Cup
• Shell Material: Polysulfone (PSU)
• Contact Finish - Mating: Gold
• Ingress Protection: IP50 - Dust Protected
• Insert Material: Polyetheretherketone (PEEK)
• Mounting Type: Free Hanging (In-Line)
• Cable Opening: 0.209" ~ 0.256" (5.30mm ~ 6.50mm)

Allowable Variation Parameters:

• Current Rating: Substitute must meet or exceed 3A
• Operating Temperature: Substitute must support the full range of -50°C ~ 150°C or a subset thereof
• Fastening Type: Push-Pull variants acceptable
• Orientation: A-series compatibility

The substitute part S11MA7-P10MCC0-6530 (ODU MEDI-SNAP®) meets all mandatory matching parameters and is classified as a direct equivalent for this application category.

Parameter Comparison

Engineering Selection Recommendations

Primary Part (PAA.M1.0GL.AC65B - LEMO): Select this part when full specification compliance is required, particularly for applications operating at temperatures above 120°C or requiring the full 3A current rating. This part maintains active production status with 1018 units in current inventory. ROHS3 compliance and unlimited moisture sensitivity rating support deployment in regulated industrial and medical environments.

Substitute Part (S11MA7-P10MCC0-6530 - ODU MEDI-SNAP®): This part is suitable for applications where operating temperature does not exceed 120°C and current requirements do not exceed 2.75A. The substitute maintains identical mechanical and electrical interface characteristics, shell material composition, and ingress protection rating. ROHS3 compliance and unlimited moisture sensitivity rating align with the primary part's regulatory status. Current inventory of 771 units supports immediate availability.

Selection Criteria:

• Use PAA.M1.0GL.AC65B for full temperature range (-50°C to 150°C) applications
• Use S11MA7-P10MCC0-6530 for applications limited to -50°C to 120°C operating range
• Verify current requirements do not exceed 2.75A when selecting the substitute part
• Both parts are suitable for automotive, industrial, medical, and testing equipment applications

Frequently Asked Questions (FAQ)

Q: Can S11MA7-P10MCC0-6530 be used as a direct replacement for PAA.M1.0GL.AC65B?

A: The S11MA7-P10MCC0-6530 is mechanically and electrically compatible for applications where operating temperature remains within -50°C to 120°C and current does not exceed 2.75A. Applications requiring the full -50°C to 150°C temperature range or 3A current rating require the primary part.

Q: What are the key differences between these two connectors?

A: The primary differences are current rating (3A vs. 2.75A) and maximum operating temperature (150°C vs. 120°C). All other parameters including connector type, pin count, termination method, shell material, contact finish, and ingress protection are identical.

Q: Are both parts RoHS compliant?

A: Yes, both PAA.M1.0GL.AC65B and S11MA7-P10MCC0-6530 are ROHS3 compliant and REACH unaffected.

Q: What is the significance of the shell size designation (M10 vs. 1)?

A: M10 and 1 represent equivalent shell size designations for 10-position circular connectors within their respective manufacturer standards. Both designations refer to the same physical interface.

Q: Can these connectors be used interchangeably in medical applications?

A: Both connectors are rated for medical applications. Selection depends on specific temperature and current requirements of the medical device. Verify that the substitute part's operating temperature range and current rating meet the application requirements.

Q: What is the moisture sensitivity level, and why is it important?

A: Both parts have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. These connectors can be stored and handled without special moisture control measures, simplifying logistics and inventory management.