PAA.M0.2GL.AC65J Equivalent & Substitute Parts

Part Overview

The PAA.M0.2GL.AC65J is a 2-position circular connector plug with male pins and solder cup termination, manufactured by LEMO. This connector is designed for free-hanging, in-line applications requiring push-pull detent lock fastening. The part is currently active in production with 829 units in stock. Equivalent and substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design requirements permit component flexibility within specified electrical and mechanical parameters.

Substiute Parts

PAA.M0.2GL.AC65J

LEMOIn Stock: 861PAA.M0.2GL.AC65J Datasheet

Current PartRFQ

S11MA7-P02MPH0-6540

ODUIn Stock: 1030S11MA7-P02MPH0-6540 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PAA.M0.2GL.AC65J is determined by strict alignment of the following critical parameters:

• Connector Type & Position Count: Plug configuration with 2 male pin positions
• Termination Method: Solder cup termination for direct wire attachment
• Fastening Mechanism: Push-pull detent lock engagement
• Mounting Configuration: Free-hanging, in-line orientation
• Shell Material & Contact Finish: Polysulfone shell with gold-plated mating contacts
• Environmental Protection: IP50 dust protection rating
• Cable Accommodation: 0.209" to 0.256" (5.30mm to 6.50mm) cable opening range
• Regulatory Compliance: ROHS3 compliance and REACH unaffected status

The substitute part S11MA7-P02MPH0-6540 (ODU MEDI-SNAP®) meets these core substitution criteria while maintaining functional and mechanical compatibility within the specified parameter envelope.

Parameter Comparison

Engineering Selection Recommendations

Both the PAA.M0.2GL.AC65J and S11MA7-P02MPH0-6540 are active production parts with ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment for industrial, medical, and testing equipment applications.

The PAA.M0.2GL.AC65J supports an operating temperature range of -50°C to 150°C. The substitute S11MA7-P02MPH0-6540 operates within -50°C to 120°C. Selection between these parts depends on application temperature requirements. For applications requiring operation above 120°C, the PAA.M0.2GL.AC65J is the appropriate choice.

The S11MA7-P02MPH0-6540 provides a current rating of 14A compared to the 10A rating of the PAA.M0.2GL.AC65J. This higher current capacity does not restrict substitution in applications designed for 10A operation.

Both connectors maintain identical cable opening specifications (0.209" to 0.256"), shell material composition, contact finish, and ingress protection rating, ensuring mechanical and environmental compatibility.

Frequently Asked Questions (FAQ)

Q: Can the S11MA7-P02MPH0-6540 be used as a direct replacement for the PAA.M0.2GL.AC65J?

A: Yes, within the specified operating temperature range of -50°C to 120°C. Both connectors share identical 2-position solder cup configuration, push-pull fastening, PSU shell material, gold contact finish, IP50 protection, and cable opening dimensions. Verify application temperature requirements do not exceed 120°C.

Q: What is the difference in current rating between these parts?

A: The PAA.M0.2GL.AC65J is rated for 10A, while the S11MA7-P02MPH0-6540 is rated for 14A. The substitute part exceeds the current capacity of the primary part. Applications designed for 10A operation are compatible with the higher-rated substitute.

Q: Are there temperature limitations when using the substitute part?

A: Yes. The PAA.M0.2GL.AC65J operates from -50°C to 150°C, while the S11MA7-P02MPH0-6540 operates from -50°C to 120°C. Applications requiring sustained operation above 120°C must use the PAA.M0.2GL.AC65J.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both the PAA.M0.2GL.AC65J and S11MA7-P02MPH0-6540 are ROHS3 compliant and REACH unaffected, meeting current regulatory standards for industrial, medical, and testing equipment applications.

Q: What is the packaging difference between these parts?

A: The PAA.M0.2GL.AC65J is supplied in standard packaging, while the S11MA7-P02MPH0-6540 is supplied in bulk packaging. Verify packaging requirements for your procurement and assembly processes.

Q: Are the mechanical dimensions identical?

A: Yes. Both connectors share identical shell size (M02 / Size 1), cable opening range (0.209" to 0.256"), and mounting configuration (free-hanging, in-line). Physical interchangeability is confirmed for mechanical integration.