P0080ECMCL Equivalent & Substitute Parts

Part Overview

The P0080ECMCL is a 6V off-state TVS thyristor manufactured by Littelfuse Inc. in the SIDACtor® series. This component is designed for transient voltage suppression applications requiring high peak pulse current handling. The part is active in production with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when electrical characteristics, mechanical packaging, and compliance certifications remain equivalent across the specified parameter range.

Substiute Parts

P0080ECMCL

Littelfuse Inc.In Stock: 1231P0080ECMCL Datasheet

Current PartRFQ

P0080ECL

Littelfuse Inc.In Stock: 1440P0080ECL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of TVS thyristors in the P0080ECMCL category is determined by equivalence across the following critical parameters:

• Voltage ratings: Off-state voltage (6V), breakover voltage (25V), and on-state voltage (4V) must match exactly
• Current specifications: Peak pulse current at 8/20µs (400A) and 10/1000µs (100A) must be identical
• Hold current (Ih): 50 mA threshold must be maintained
• Capacitance: 260 pF specification must be preserved
• Package and mounting: TO-226-2 / TO-92-2 through-hole configuration required
• Compliance: RoHS3 and REACH status must be equivalent

The P0080ECL substitute part meets all these criteria with identical electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

Both P0080ECMCL and P0080ECL are active production parts from Littelfuse Inc. with identical electrical specifications and mechanical packaging. Selection between these parts may be based on inventory availability and supply chain considerations. Both parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory equivalence for applications requiring environmental and hazardous substance restrictions. The through-hole TO-226-2 / TO-92-2 package configuration is consistent across both parts, supporting direct board-level substitution without design modification.

Frequently Asked Questions (FAQ)

Q: Can P0080ECL be used as a direct replacement for P0080ECMCL?

A: Yes. Both parts are electrically and mechanically equivalent with identical voltage ratings (6V off-state, 25V breakover, 4V on-state), peak pulse current specifications (400A at 8/20µs, 100A at 10/1000µs), hold current (50 mA), and capacitance (260 pF). Package configuration and mounting type are identical.

Q: Are there any compliance differences between these parts?

A: No. Both parts carry ROHS3 compliance and REACH unaffected status. Moisture sensitivity level is 1 (unlimited) for both parts.

Q: What determines substitution eligibility for TVS thyristors in this category?

A: Substitution requires exact matching of off-state voltage, breakover voltage, on-state voltage, peak pulse current ratings at specified pulse widths, hold current, capacitance, and package configuration. Compliance certifications must also be equivalent.

Q: Can these parts be used interchangeably in existing designs?

A: Yes. The identical TO-226-2 / TO-92-2 through-hole package and electrical specifications support direct board-level interchange without circuit design changes.

Q: What is the difference between the part numbers P0080ECMCL and P0080ECL?

A: The part numbers differ in designation, but both parts are manufactured by Littelfuse Inc. in the SIDACtor® series with identical electrical and mechanical specifications. The difference reflects internal Littelfuse part numbering conventions.