OSTVI024150 Equivalent & Substitute Parts

Part Overview

The OSTVI024150 is a 2-position wire-to-board terminal block manufactured by On Shore Technology Inc., designed for vertical PCB mounting with 7.5mm pitch spacing. This component features screw-based rising cage clamp termination and is rated for 16A at 300V operation across a -30°C to 105°C temperature range.

The OSTVI024150 carries an obsolete product status. Identifying equivalent substitute parts is necessary to maintain design continuity, ensure supply chain reliability, and support ongoing production or maintenance requirements for systems utilizing this terminal block configuration.

Substiute Parts

OSTVI024150

On Shore Technology Inc.In Stock: 1022OSTVI024150 Datasheet

Current PartRFQ

ED360/2

On Shore Technology Inc.In Stock: 823ED360/2 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The ED360/2 qualifies as a direct substitute for the OSTVI024150 based on alignment across all critical electrical and mechanical parameters that define functional compatibility:

Matching Parameters:

• 2 positions per level
• 0.295" (7.50mm) pitch spacing
• Vertical with board mating orientation
• 16A current rating
• 300V voltage rating
• Through hole mounting
• Screw-based rising cage clamp termination
• M3 screw thread
• -30°C to 105°C operating temperature range
• ROHS3 compliance

Parameter Variance: The ED360/2 specifies a wire gauge range of 12-22 AWG, which is narrower than the OSTVI024150's 12-28 AWG specification. This represents a functional constraint: the ED360/2 does not accommodate wire gauges smaller than 22 AWG. Applications requiring 24, 26, or 28 AWG wire termination cannot use the ED360/2 as a direct substitute.

Parameter Comparison

Engineering Selection Recommendations

The ED360/2 is the qualified substitute for OSTVI024150 applications. The ED360/2 maintains active product status with On Shore Technology Inc., ensuring ongoing availability and supply chain support. Both components carry ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements.

Selection of ED360/2 is appropriate for applications utilizing wire gauges within the 12-22 AWG range. Applications requiring accommodation of 24, 26, or 28 AWG conductors must retain the OSTVI024150 or identify alternative terminal block designs that support the full wire gauge specification.

Frequently Asked Questions (FAQ)

Q: Can ED360/2 replace OSTVI024150 in all applications?

A: ED360/2 is a functional substitute for applications using wire gauges 12-22 AWG. Applications requiring 24, 26, or 28 AWG wire termination cannot use ED360/2 due to its narrower wire gauge specification.

Q: What is the primary reason for substitution?

A: OSTVI024150 carries obsolete product status. ED360/2 is an active product offering identical electrical ratings, mechanical configuration, and regulatory compliance.

Q: Are there packaging differences between these parts?

A: OSTVI024150 is supplied in standard packaging. ED360/2 is supplied in bulk packaging. Verify packaging requirements for your procurement and assembly processes.

Q: Do both parts meet current compliance standards?

A: Yes. Both OSTVI024150 and ED360/2 are ROHS3 compliant and REACH unaffected.

Q: What is the difference in housing material?

A: OSTVI024150 uses thermoplastic housing. ED360/2 uses polyamide (PA) nylon housing. Both materials support the identical operating temperature range and electrical specifications.

Q: Are screw torque specifications identical?

A: OSTVI024150 specifies 0.4 Nm (4.6 Lb-In) screw torque. ED360/2 specifies 0.5 Nm (4.4 Lb-In) screw torque. Follow the torque specification for the selected component during assembly.