NTM-460 LED Standoff Mount Equivalent & Substitute Parts

Part Overview

The NTM-460 is a T1/T1 3/4 LED standoff mount manufactured by Bivar Inc., constructed from black nylon with a length of 0.460" (11.68mm). This component is an active product in full production with ROHS3 compliance. Substitute parts are identified when applications require equivalent mechanical and electrical characteristics but alternative sources or inventory availability drive component selection decisions.

Substiute Parts

NTM-460

Bivar Inc.In Stock: 1023NTM-460 Datasheet

Current PartRFQ

705820115

Würth ElektronikIn Stock: 2287705820115 Datasheet

Parametric EquivalentRFQ

705820120

Würth ElektronikIn Stock: 3511705820120 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following parameters: LED type compatibility (T1, T1 3/4), material composition (nylon), color (black), and RoHS compliance status. The substitute parts listed maintain these core characteristics. Length variations within the following substitutes fall within acceptable tolerance ranges for T1/T1 3/4 LED standoff mounting applications:

• 705820115 (Würth Elektronik): 0.453" (11.50mm) length
• 705820120 (Würth Elektronik): 0.472" (12.00mm) length

Both substitutes are classified as parametric equivalents, sharing identical LED type, material, color, and compliance certifications as the NTM-460.

Parameter Comparison

Engineering Selection Recommendations

Both 705820115 and 705820120 are active products with full ROHS3 compliance and identical export classifications (EAR99, HTSUS 3926.90.9985). The primary distinction between substitutes is length variance: 705820115 is 0.007" shorter than the NTM-460, while 705820120 is 0.012" longer. Component selection shall be based on specific application clearance requirements and board layout constraints.

Frequently Asked Questions (FAQ)

Q: What parameters determine whether 705820115 or 705820120 can replace NTM-460?

A: Substitution is valid when the application requires T1/T1 3/4 LED standoff mounts constructed from black nylon with ROHS3 compliance. The length variation (0.453" to 0.472") must be compatible with available board mounting clearance.

Q: Are there material or color differences between the NTM-460 and substitute parts?

A: No. All parts are constructed from nylon and are black in color, with identical RoHS certification status.

Q: How do the length differences affect component compatibility?

A: The substitute parts vary in length by ±0.007" to ±0.012" relative to the NTM-460. Design verification is required to confirm clearance compatibility with specific PCB layouts and enclosure dimensions.

Q: Are all parts available in the same packaging format?

A: Yes. NTM-460, 705820115, and 705820120 are all supplied in bag packaging.

Q: What is the difference between Moisture Sensitivity Level (MSL) designations across these parts?

A: NTM-460 carries MSL-1 (Unlimited), while Würth Elektronik substitutes carry "Not Applicable" designation. Both statuses are compliant with standard handling and storage requirements for nylon standoff components.