NOIP1FN5000A-QDI Equivalent & Substitute Parts

Part Overview

The NOIP1FN5000A-QDI is a CMOS image sensor with integrated processor from onsemi's Python series, featuring a 5MP resolution with 2592H x 2048V active pixel array and 4.8µm x 4.8µm pixel size. This component is classified as obsolete, making identification of compatible substitute parts essential for ongoing system support and new design implementations. The sensor operates across a 1.8V to 3.3V supply range and delivers 100 frames per second, suitable for industrial and embedded imaging applications.

Substiute Parts

NOIP1FN5000A-QDI

onsemiIn Stock: 30183NOIP1FN5000A-QDI Datasheet

Current PartRFQ

NOIP1FN5000A-QTI

onsemiIn Stock: 765NOIP1FN5000A-QTI Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the NOIP1FN5000A-QDI is determined by strict alignment across the following critical parameters:

• Sensor Type & Architecture: CMOS with Processor configuration
• Pixel Array Dimensions: 2592H x 2048V resolution
• Pixel Geometry: 4.8µm x 4.8µm pitch
• Frame Rate: 100 fps capability
• Supply Voltage Range: 1.8V ~ 3.3V compatibility
• Package Format: 84-LCC (19x19) mechanical and electrical interface
• Operating Temperature Range: -40°C ~ 85°C (TJ)
• Compliance Standards: ROHS3 and REACH requirements

The NOIP1FN5000A-QTI meets all substitution criteria, maintaining identical sensor specifications while differing in product status (Active vs. Obsolete) and packaging format (Tray vs. standard packaging).

Parameter Comparison

Engineering Selection Recommendations

The NOIP1FN5000A-QTI is a direct functional equivalent to the NOIP1FN5000A-QDI. Both components maintain identical electrical and mechanical specifications across all critical parameters. The primary distinction is product lifecycle status: the NOIP1FN5000A-QDI is obsolete, while the NOIP1FN5000A-QTI carries active product status with current manufacturing support.

Both parts satisfy ROHS3 and REACH compliance requirements, ensuring regulatory alignment for industrial and commercial applications. The 84-LCC (19x19) package format remains consistent, eliminating redesign requirements for PCB layouts and mechanical assemblies.

Selection between these parts should be based on supply chain availability and long-term sourcing strategy. The active status of NOIP1FN5000A-QTI provides extended procurement windows and manufacturer support continuity.

Frequently Asked Questions (FAQ)

Q: Can NOIP1FN5000A-QTI replace NOIP1FN5000A-QDI in existing designs?

A: Yes. Both components share identical electrical specifications, pixel array dimensions, frame rate, supply voltage range, and operating temperature range. The 84-LCC (19x19) package format is mechanically and electrically compatible, requiring no circuit modifications.

Q: What is the difference between the QDI and QTI packaging designations?

A: The QDI variant uses standard packaging, while QTI uses tray packaging. Both maintain the same 84-LCC (19x19) form factor and electrical interface. The packaging difference affects handling and storage procedures but does not impact functional performance.

Q: Are there compliance differences between these parts?

A: No. Both NOIP1FN5000A-QDI and NOIP1FN5000A-QTI maintain ROHS3 compliance and REACH unaffected status. Moisture sensitivity level remains constant at MSL 3 (168 Hours) for both variants.

Q: Why is the NOIP1FN5000A-QDI listed as obsolete?

A: Obsolete status indicates the part has reached end-of-life in the manufacturer's product portfolio. The NOIP1FN5000A-QTI, carrying active status, represents the current production equivalent and is recommended for new designs and ongoing procurement.

Q: Are the frame rate and resolution identical between these sensors?

A: Yes. Both deliver 100 frames per second with a 2592H x 2048V active pixel array and 4.8µm x 4.8µm pixel pitch, ensuring identical imaging performance characteristics.