MY2IN-D2-GS DC48 Equivalent & Substitute Parts

Part Overview

The MY2IN-D2-GS DC48 is a general purpose relay manufactured by Omron Automation and Safety with a 48VDC coil. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing system maintenance and new design implementations. The MY2IN series provides DPDT (2 Form C) contact configuration suitable for general industrial switching applications.

Substiute Parts

MY2IN-D2-GS DC48

Omron Automation and SafetyIn Stock: 918MY2IN-D2-GS DC48 Datasheet

Current PartRFQ

MY2IN-D2-GS-R DC48

Omron Automation and SafetyIn Stock: 804MY2IN-D2-GS-R DC48 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the MY2IN-D2-GS DC48 is determined by the following critical electrical and mechanical parameters:

• Coil voltage: 48VDC
• Contact form: DPDT (2 Form C)
• Contact rating: 10 A
• Switching voltage: 250VAC, 220VDC maximum
• Mounting type: Socketable
• Termination style: Plug In, Quick Connect - 0.110" (2.8mm)
• Operating temperature range: -40°C to 70°C

The substitute part MY2IN-D2-GS-R DC48 maintains identical electrical specifications and mechanical compatibility, enabling direct replacement in existing applications.

Parameter Comparison

Engineering Selection Recommendations

The MY2IN-D2-GS-R DC48 is the designated substitute for the obsolete MY2IN-D2-GS DC48. This part maintains active product status with Omron Automation and Safety, ensuring continued availability and manufacturing support. Both components share identical electrical specifications and mechanical interfaces, supporting direct substitution without circuit modification or mechanical redesign.

Selection of the MY2IN-D2-GS-R DC48 is appropriate for applications requiring 48VDC coil operation, DPDT contact configuration, and socketable mounting in the MY2IN relay series.

Frequently Asked Questions (FAQ)

Q: Can the MY2IN-D2-GS-R DC48 directly replace the MY2IN-D2-GS DC48?

A: Yes. Both components share identical coil voltage (48VDC), contact form (DPDT), contact rating (10 A), switching voltage (250VAC, 220VDC maximum), mounting type (socketable), and termination style (Plug In, Quick Connect - 0.110"). Direct substitution is supported without circuit or mechanical modifications.

Q: What is the primary difference between these two parts?

A: The MY2IN-D2-GS DC48 is obsolete, while the MY2IN-D2-GS-R DC48 maintains active product status. The substitute part includes documented coil specifications (18.8 mA coil current, 2.56 kOhms coil resistance) and timing parameters (20 ms operate and release times).

Q: Are there packaging differences between these parts?

A: Both components are supplied in bulk packaging. No packaging format change is required when transitioning from the obsolete to the active substitute part.

Q: What operating conditions are supported by the substitute part?

A: The MY2IN-D2-GS-R DC48 operates across -40°C to 70°C ambient temperature range with 48VDC coil excitation, 10 A contact rating, and maximum switching voltage of 250VAC or 220VDC.