MPM5000AT1 Equivalent & Substitute Parts

Part Overview

The MPM5000AT1 is a 2-resistor network voltage divider manufactured by Vishay Dale Thin Film. It features dual 250 Ohm resistors with ±0.1% tolerance and ±25ppm/°C temperature coefficient in a surface mount SOT-23 package. The part is currently active in production with 938 pieces available in inventory. Alternative equivalent parts may be required due to inventory availability, compliance requirements, or supply chain considerations.

Substiute Parts

MPM5000AT1

Vishay Dale Thin FilmIn Stock: 963MPM5000AT1 Datasheet

Current PartRFQ

MPMT5000AT1

Vishay Dale Thin FilmIn Stock: 6256MPMT5000AT1 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MPM5000AT1 is determined by strict equivalence across the following critical parameters:

• Resistance values: 250, 250 Ohm configuration
• Tolerance specification: ±0.1%
• Resistor matching ratio: ±0.05%
• Temperature coefficient: ±25ppm/°C
• Power rating: 100mW per element
• Package type: SOT-23 (TO-236-3, SC-59)
• Pin count: 3
• Operating temperature range: -55°C ~ 125°C
• Circuit function: Voltage divider application

The MPMT5000AT1 meets all electrical and mechanical parameters required for direct substitution with the MPM5000AT1.

Parameter Comparison

Engineering Selection Recommendations

The MPMT5000AT1 is a direct electrical and mechanical equivalent to the MPM5000AT1. Both parts are manufactured by Vishay Dale Thin Film and share identical specifications across all critical parameters including resistance values, tolerance, temperature coefficient, power rating, and package dimensions.

The primary distinction between these parts is RoHS compliance status. The MPM5000AT1 is RoHS non-compliant, while the MPMT5000AT1 is ROHS3 compliant. For applications requiring RoHS3 compliance, the MPMT5000AT1 is the appropriate selection. Both parts maintain REACH Unaffected status and identical moisture sensitivity levels.

Inventory availability differs significantly, with the MPMT5000AT1 offering substantially higher stock levels (6224 pieces versus 938 pieces). This may influence supply chain decisions for high-volume production requirements.

Frequently Asked Questions (FAQ)

Q: Can MPMT5000AT1 be used as a direct replacement for MPM5000AT1?

A: Yes. The MPMT5000AT1 meets all electrical specifications (250, 250 Ohm resistance, ±0.1% tolerance, ±25ppm/°C temperature coefficient, 100mW power per element) and mechanical requirements (SOT-23 package, 3-pin configuration, identical dimensions). Both parts function identically in voltage divider applications.

Q: What is the difference between these two parts?

A: The primary difference is RoHS compliance. The MPMT5000AT1 is ROHS3 compliant, while the MPM5000AT1 is RoHS non-compliant. Inventory levels also differ, with MPMT5000AT1 having higher availability.

Q: Are the package dimensions identical?

A: Yes. Both parts use the SOT-23 package with dimensions of 0.113" L x 0.051" W (2.86mm x 1.30mm) and maximum seated height of 0.044" (1.12mm). PCB footprints are identical.

Q: Do these parts have the same temperature performance?

A: Yes. Both parts operate across -55°C to 125°C with identical ±25ppm/°C temperature coefficient and ±2ppm/°C resistor-ratio-drift specifications.

Q: Which part should be selected for new designs?

A: For new designs requiring RoHS3 compliance, select MPMT5000AT1. For applications without RoHS requirements, either part is suitable based on availability and supply chain considerations.