MMCX-P-C-H-RA-TH1 Equivalent & Substitute Parts

Part Overview

The MMCX-P-C-H-RA-TH1 is an MMCX Connector Plug manufactured by Samtec Inc., designed for RF coaxial applications requiring 50 Ohm impedance. This through-hole, right-angle solder connector operates at frequencies up to 6 GHz and features snap-on fastening with gold-plated brass construction. The part maintains Active product status with 792 units in current inventory stock.

Substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable, while maintaining identical electrical and mechanical specifications required for direct component replacement in RF circuit applications.

Substiute Parts

MMCX-P-C-H-RA-TH1

Samtec Inc.In Stock: 850MMCX-P-C-H-RA-TH1 Datasheet

Current PartRFQ

MMCX-P-P-H-RA-TH1

Samtec Inc.In Stock: 847MMCX-P-P-H-RA-TH1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MMCX-P-C-H-RA-TH1 are identified based on strict equivalence across all critical electrical and mechanical parameters. The substitution logic is based on the following matching criteria:

Electrical Parameters:

• Connector style: MMCX
• Connector type: Plug, Male Pin
• Impedance: 50 Ohms
• Frequency maximum: 6 GHz
• Number of ports: 1

Mechanical Parameters:

• Mounting type: Through Hole, Right Angle
• Contact termination: Solder
• Shield termination: Solder
• Fastening type: Snap-On

Material & Construction:

• Center contact material: Brass
• Body material: Brass
• Body finish: Gold
• Center contact plating: Gold
• Dielectric material: PTFE

Compliance:

• RoHS3 Compliant
• ECCN: EAR99
• HTSUS: 8536.69.4010

Parts meeting all these criteria are classified as parametric equivalents suitable for direct substitution in applications where the MMCX-P-C-H-RA-TH1 is specified.

Parameter Comparison

Engineering Selection Recommendations

Both the MMCX-P-C-H-RA-TH1 and MMCX-P-P-H-RA-TH1 maintain Active product status from Samtec Inc., indicating ongoing manufacturer support and availability. Both parts are ROHS3 Compliant and carry identical ECCN and HTSUS classifications, meeting regulatory requirements for RF coaxial connector applications.

The MMCX-P-P-H-RA-TH1 provides an additional specification parameter: Operating Temperature range of -65°C ~ 125°C and Moisture Sensitivity Level (MSL) rating of 1 (Unlimited), along with REACH Affected status documentation. These additional specifications do not alter the electrical or mechanical equivalence but provide expanded environmental performance data.

Selection between these parts should be based on packaging requirements and inventory availability. The MMCX-P-C-H-RA-TH1 is available in standard packaging with 792 units in stock, while the MMCX-P-P-H-RA-TH1 is supplied in Tray packaging with 824 units in stock.

Frequently Asked Questions (FAQ)

Q: Can MMCX-P-P-H-RA-TH1 be used as a direct replacement for MMCX-P-C-H-RA-TH1?

A: Yes. Both parts are parametric equivalents meeting identical electrical specifications (50 Ohm impedance, 6 GHz maximum frequency, MMCX Plug Male Pin configuration) and mechanical specifications (through-hole right-angle solder termination, snap-on fastening). The parts differ only in packaging format and documented environmental specifications.

Q: What are the key electrical parameters that define substitution compatibility?

A: Substitution compatibility is determined by: MMCX connector style, Plug Male Pin type, 50 Ohm impedance, 6 GHz maximum frequency, single port configuration, and solder termination for both contact and shield. All these parameters are identical between the main part and substitute.

Q: Are there differences in mechanical mounting between these parts?

A: No. Both parts feature identical through-hole, right-angle mounting with snap-on fastening. PCB layout and mounting hole patterns are compatible.

Q: What is the difference between the packaging options?

A: The MMCX-P-C-H-RA-TH1 uses standard packaging, while the MMCX-P-P-H-RA-TH1 is supplied in Tray packaging. This affects handling and storage but does not impact electrical or mechanical performance.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 Compliant with identical ECCN (EAR99) and HTSUS (8536.69.4010) classifications. The MMCX-P-P-H-RA-TH1 additionally documents REACH Affected status and provides operating temperature specifications.

Q: What is the maximum operating frequency for these connectors?

A: Both parts are rated for maximum frequency of 6 GHz, suitable for RF applications within this bandwidth specification.