MFR-25FRF52-5K76 Equivalent & Substitute Parts

Part Overview

The MFR-25FRF52-5K76 is a 5.76 kOhms ±1% 0.25W through-hole resistor with axial metal film construction manufactured by YAGEO. This component is classified as Active product status with full ROHS3 compliance. Substitute parts are identified to provide alternative sourcing options when the primary part number becomes unavailable or when packaging requirements differ between procurement channels.

Substiute Parts

MFR-25FRF52-5K76

YAGEOIn Stock: 5664MFR-25FRF52-5K76 Datasheet

Current PartRFQ

MFR-25FBF52-5K76

YAGEOIn Stock: 12395MFR-25FBF52-5K76 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MFR-25FRF52-5K76 is determined by strict equivalence across the following critical parameters:

• Resistance value: 5.76 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Composition: Metal Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C to 155°C
• Package configuration: Axial
• Physical dimensions: 0.094" Dia x 0.248" L (2.40mm x 6.30mm)
• Termination count: 2

The identified substitute part MFR-25FBF52-5K76 maintains identical electrical and mechanical specifications. The only difference is packaging format: the main part is supplied in Cut Tape (CT) while the substitute is supplied in Bulk packaging. Both parts are manufactured by YAGEO within the MFR series and carry Active product status.

Parameter Comparison

Engineering Selection Recommendations

Both the MFR-25FRF52-5K76 and MFR-25FBF52-5K76 are Active products manufactured by YAGEO with identical electrical and mechanical specifications. Selection between these parts should be based on packaging requirements and inventory availability:

The MFR-25FRF52-5K76 in Cut Tape packaging is suitable for automated assembly processes requiring tape-and-reel format. The MFR-25FBF52-5K76 in Bulk packaging accommodates manual assembly or applications where tape packaging is not required. Both parts maintain ROHS3 compliance and are suitable for applications operating within the -55°C to 155°C temperature range.

Frequently Asked Questions (FAQ)

Q: Can MFR-25FBF52-5K76 be used as a direct replacement for MFR-25FRF52-5K76?

A: Yes. Both parts are electrically and mechanically identical. The difference is packaging format only: Cut Tape versus Bulk. Circuit performance and reliability characteristics are equivalent.

Q: What is the primary difference between these two part numbers?

A: The packaging format differs. MFR-25FRF52-5K76 is supplied in Cut Tape (CT) format suitable for pick-and-place assembly. MFR-25FBF52-5K76 is supplied in Bulk format. All electrical parameters, physical dimensions, and performance specifications are identical.

Q: Are both parts ROHS3 compliant?

A: Yes. Both MFR-25FRF52-5K76 and MFR-25FBF52-5K76 carry ROHS3 compliance certification.

Q: What is the operating temperature range for these resistors?

A: Both parts operate across -55°C to 155°C with a temperature coefficient of ±100ppm/°C.

Q: Can these axial resistors be used in PCB through-hole applications?

A: Yes. Both parts feature axial package configuration with 2 terminations designed for through-hole PCB mounting. Physical dimensions are 0.094" diameter by 0.248" length (2.40mm x 6.30mm).