MF1/4CC2201F Equivalent & Substitute Parts

Part Overview

The MF1/4CC2201F is a 2.2 kOhms ±1% metal film through-hole resistor rated at 0.25W (1/4W) in axial package configuration. Manufactured by KOA Speer Electronics, Inc., this component is designed for automotive applications and meets AEC-Q200 qualification standards. The part maintains active product status with 1955 units currently in stock. Substitute parts are identified when packaging format differs while all critical electrical and mechanical parameters remain identical, enabling procurement flexibility without circuit performance impact.

Substiute Parts

MF1/4CC2201F

KOA Speer Electronics, Inc.In Stock: 2062MF1/4CC2201F Datasheet

Current PartRFQ

MF1/4CCT52R2201F

KOA Speer Electronics, Inc.In Stock: 6152MF1/4CCT52R2201F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution between MF1/4CC2201F and MF1/4CCT52R2201F is valid based on identical electrical and mechanical specifications. Both parts share the same resistance value (2.2 kOhms), tolerance (±1%), power rating (0.25W), composition (metal film), temperature coefficient (±50ppm/°C), operating temperature range (-55°C to 155°C), axial package configuration, and physical dimensions (0.091" Dia x 0.248" L). The sole difference is packaging format: bulk versus cut tape. This distinction affects supply chain logistics and component handling but does not alter circuit performance, thermal characteristics, or reliability metrics. Both parts maintain AEC-Q200 automotive qualification and ROHS3 compliance.

Parameter Comparison

Engineering Selection Recommendations

Selection between MF1/4CC2201F and MF1/4CCT52R2201F depends on procurement and assembly requirements rather than electrical performance. Both parts are manufactured by KOA Speer Electronics, Inc. and maintain identical active product status. The bulk packaging (MF1/4CC2201F) suits applications requiring manual component selection or lower-volume assembly operations. Cut tape packaging (MF1/4CCT52R2201F) is optimized for automated pick-and-place assembly systems and high-volume production environments. Both configurations maintain full AEC-Q200 automotive qualification and ROHS3 compliance, ensuring equivalent reliability and regulatory acceptance across automotive applications. Inventory availability shows 6050 units in cut tape format versus 1955 units in bulk format.

Frequently Asked Questions (FAQ)

Q: Can MF1/4CCT52R2201F replace MF1/4CC2201F in circuit design? A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (cut tape versus bulk). Circuit performance, thermal behavior, and reliability are equivalent.

Q: What is the difference between bulk and cut tape packaging? A: Bulk packaging contains loose components suitable for manual handling and low-volume assembly. Cut tape packaging places components on carrier tape for automated assembly equipment. Both formats contain identical components with identical specifications.

Q: Are both parts suitable for automotive applications? A: Yes. Both MF1/4CC2201F and MF1/4CCT52R2201F carry AEC-Q200 automotive qualification and are ROHS3 compliant, meeting automotive industry standards.

Q: Do these parts have different temperature performance? A: No. Both parts operate across -55°C to 155°C with identical ±50ppm/°C temperature coefficient. Thermal performance is equivalent.

Q: Which part should I select for high-volume production? A: MF1/4CCT52R2201F (cut tape) is designed for automated assembly lines. MF1/4CC2201F (bulk) is suitable for manual assembly or lower-volume applications.

Q: Are the physical dimensions identical? A: Yes. Both parts measure 0.091" Dia x 0.248" L (2.30mm x 6.30mm) in axial configuration. PCB footprint and mounting requirements are identical.