MDF7-16DP-2.54DSA Equivalent & Substitute Parts

Part Overview

The MDF7-16DP-2.54DSA is a rectangular connector header manufactured by Hirose Electric Co Ltd, designed for through-hole mounting applications. This 16-position, 2-row connector operates at 3A current rating and 250V voltage rating with a 0.100" (2.54mm) pitch configuration. The part is classified as obsolete, making identification of active equivalent alternatives essential for ongoing production and maintenance applications.

Substiute Parts

MDF7-16DP-2.54DSA

Hirose Electric Co LtdIn Stock: 1164MDF7-16DP-2.54DSA Datasheet

Current PartRFQ

MDF7-16DP-2.54DSA(96)

Hirose Electric Co LtdIn Stock: 860MDF7-16DP-2.54DSA(96) Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MDF7-16DP-2.54DSA is determined by strict alignment of the following electrical and mechanical parameters:

• Connector type (Header)
• Contact type (Male Pin)
• Number of positions (16) and rows (2)
• Pitch specification (0.100" / 2.54mm mating pitch and row spacing)
• Mounting method (Through Hole)
• Termination type (Solder)
• Current rating (3A minimum)
• Voltage rating (250V minimum)
• Operating temperature range (-35°C ~ 85°C)
• Contact material and finish specifications
• Insulation material (Polybutylene Terephthalate / PBT)
• RoHS compliance status

The MDF7-16DP-2.54DSA(96) variant meets all substitution criteria as an active product within the same MDF7 series, maintaining identical electrical performance and mechanical compatibility while offering improved availability.

Parameter Comparison

Engineering Selection Recommendations

The MDF7-16DP-2.54DSA(96) is a direct functional equivalent to the obsolete MDF7-16DP-2.54DSA. Both parts maintain identical electrical specifications (3A current rating, 250V voltage rating), mechanical dimensions, and contact configurations. The substitute part carries active product status from Hirose Electric Co Ltd, ensuring ongoing availability and manufacturing support.

Both parts satisfy RoHS compliance requirements and UL94 V-0 flammability certification. The primary distinction is product lifecycle status: the original part is obsolete while the substitute remains in active production. For new designs and ongoing production requirements, the MDF7-16DP-2.54DSA(96) provides equivalent performance with assured supply chain continuity.

Frequently Asked Questions (FAQ)

Q: Can MDF7-16DP-2.54DSA(96) be used as a direct replacement for MDF7-16DP-2.54DSA?

A: Yes. Both parts are manufactured by Hirose Electric Co Ltd within the MDF7 series and share identical electrical ratings (3A, 250V), mechanical dimensions, contact configurations, and material specifications. The substitute part is the active production variant.

Q: What is the difference between the two part numbers?

A: The primary difference is product status. MDF7-16DP-2.54DSA is classified as obsolete, while MDF7-16DP-2.54DSA(96) is active. The "(96)" designation indicates the packaging variant (Bag). Both parts are electrically and mechanically identical.

Q: Are there any compatibility concerns when substituting these parts?

A: No compatibility concerns exist. Both parts feature identical pitch (0.100" / 2.54mm), row spacing, contact length, insulation height, and mounting specifications. They are designed for the same through-hole solder termination applications.

Q: What certifications apply to both parts?

A: Both parts are RoHS Compliant and carry UL94 V-0 material flammability rating. Both operate across the -35°C ~ 85°C temperature range with Moisture Sensitivity Level 1 (Unlimited).

Q: Is the packaging difference significant?

A: The packaging difference (unspecified for the main part versus Bag for the substitute) does not affect electrical or mechanical performance. Packaging selection depends on inventory management and handling requirements for your application.