MB7760-110 Equivalent & Substitute Parts

Part Overview

The MB7760-110 is an ultrasonic sensor from MaxBotix Inc.'s 4-20SC-MaxSonar-WR series, operating at 42kHz with a rated voltage range of 10V to 32V. This component functions as both a transmitter and receiver for distance measurement applications. The MB7760-110 is currently classified as obsolete, making identification of active equivalent parts essential for ongoing system support and new design implementations.

Substiute Parts

MB7760-110

MaxBotix Inc.In Stock: 765MB7760-110 Datasheet

Current PartRFQ

MB7760-111

MaxBotix Inc.In Stock: 1180MB7760-111 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MB7760-110 is determined by strict equivalence across the following critical parameters:

• Frequency: 42kHz (identical operating frequency required)
• Voltage Rating: 10V ~ 32V (identical supply voltage range required)
• Beam Angle: 11° (identical detection pattern required)
• Operating Temperature Range: -40°C ~ 65°C (identical thermal operating window required)
• Type: Transmitter, Receiver (identical functional configuration required)
• Series: 4-20SC-MaxSonar-WR (same product line)
• RoHS Compliance: ROHS3 Compliant (regulatory equivalence)

The MB7760-111 meets all substitution criteria as an active equivalent part within the same series.

Parameter Comparison

Engineering Selection Recommendations

The MB7760-111 is the direct equivalent substitute for the MB7760-110. Both components share identical electrical and mechanical specifications across all critical parameters. The primary distinction is product status: the MB7760-110 is obsolete while the MB7760-111 is active and currently in production.

For applications currently using the MB7760-110, transition to the MB7760-111 is supported by full parameter equivalence and ROHS3 compliance certification. The MB7760-111 maintains the same functional characteristics, voltage operating range, frequency response, and thermal specifications, ensuring direct compatibility in existing circuit designs.

Frequently Asked Questions (FAQ)

Q: Can the MB7760-111 directly replace the MB7760-110 in existing designs?

A: Yes. The MB7760-111 is electrically and mechanically equivalent to the MB7760-110 across all specified parameters, including frequency, voltage rating, beam angle, and operating temperature range. Direct substitution is supported.

Q: What is the difference between the MB7760-110 and MB7760-111?

A: Both parts are identical in electrical and mechanical specifications. The MB7760-110 is obsolete, while the MB7760-111 is an active product currently in production. The packaging differs: MB7760-110 uses standard packaging while MB7760-111 is supplied in bulk packaging.

Q: Why is the MB7760-110 listed as obsolete?

A: Product status reflects manufacturing lifecycle decisions by MaxBotix Inc. The MB7760-111 serves as the active production equivalent and is recommended for all new designs and ongoing supply requirements.

Q: Are there any compliance differences between these parts?

A: No. Both the MB7760-110 and MB7760-111 maintain ROHS3 compliance and carry identical ECCN (EAR99) and HTSUS (8543.70.4500) classifications.

Q: What parameters must match for a part to be considered a substitute?

A: Substitution requires equivalence in frequency (42kHz), voltage rating (10V ~ 32V), beam angle (11°), operating temperature range (-40°C ~ 65°C), functional type (Transmitter, Receiver), and series designation (4-20SC-MaxSonar-WR).