MAX5033DASA-T Equivalent & Substitute Parts

Part Overview

The MAX5033DASA-T is a buck switching regulator IC from Analog Devices Inc./Maxim Integrated, designed for positive adjustable step-down voltage regulation with a 500mA output current capability. This component operates across a wide input voltage range of 7.5V to 76V and provides adjustable output voltage from 1.221V to 13.2V in an 8-SOIC surface mount package.

The MAX5033DASA-T is classified as obsolete. Identifying equivalent substitute parts is necessary to ensure design continuity, maintain supply chain reliability, and support ongoing production requirements for applications utilizing this regulator topology.

Substiute Parts

MAX5033DASA-T

Analog Devices Inc./Maxim IntegratedIn Stock: 965MAX5033DASA-T Datasheet

Current PartRFQ

MAX5033DASA+T

Analog Devices Inc./Maxim IntegratedIn Stock: 15674MAX5033DASA+T Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MAX5033DASA-T is determined by strict equivalence across the following critical parameters:

• Topology & Function: Buck switching regulator with step-down capability
• Output Configuration: Positive adjustable output
• Electrical Specifications: Input voltage range 7.5V–76V, output voltage range 1.221V–13.2V, 500mA output current
• Switching Frequency: 125kHz operation
• Package Compatibility: 8-SOIC (0.154", 3.90mm Width) surface mount package
• Regulatory Compliance: ROHS3 compliant, MSL Level 1

The substitute part must match all electrical parameters and physical package specifications to ensure direct functional replacement without circuit redesign.

Parameter Comparison

Engineering Selection Recommendations

The MAX5033DASA+T is the direct substitute for the MAX5033DASA-T. Both parts are manufactured by Analog Devices Inc./Maxim Integrated and share identical electrical and mechanical specifications across all critical parameters.

The primary distinction is product status: the MAX5033DASA-T is obsolete, while the MAX5033DASA+T maintains active status with significantly higher inventory availability (15,631 units versus 859 units). Both parts maintain ROHS3 compliance and MSL Level 1 rating, ensuring equivalent regulatory and environmental performance.

The packaging difference (Cut Tape & Digi-Reel for the substitute versus unspecified for the main part) does not affect functional compatibility and reflects standard distribution formats for active components.

Frequently Asked Questions (FAQ)

Q: Can the MAX5033DASA+T directly replace the MAX5033DASA-T in existing designs?

A: Yes. The MAX5033DASA+T is electrically and mechanically identical to the MAX5033DASA-T across all specified parameters. No circuit modifications are required for substitution.

Q: What is the difference between MAX5033DASA-T and MAX5033DASA+T?

A: The parts are functionally equivalent. The primary differences are product status (obsolete versus active) and packaging format (unspecified versus Cut Tape & Digi-Reel). The "+T" designation indicates the active production variant with standard tape packaging.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts maintain identical ROHS3 compliance status and MSL Level 1 rating. Regulatory certifications (REACH Unaffected, ECCN EAR99) are equivalent.

Q: What are the critical parameters for substitution compatibility?

A: Substitution requires matching input voltage range (7.5V–76V), output voltage range (1.221V–13.2V), output current (500mA), switching frequency (125kHz), package type (8-SOIC), and operating temperature range (-40°C to 125°C).

Q: Is the 8-SOIC package footprint identical between both parts?

A: Yes. Both parts use the 8-SOIC (0.154", 3.90mm Width) package with identical pin configuration and PCB footprint requirements.