MAX189CEWE+ Equivalent & Substitute Parts

Part Overview

The MAX189CEWE+ is a 12-bit Analog to Digital Converter (ADC) manufactured by Analog Devices Inc./Maxim Integrated, designed for single-ended input data acquisition applications. This SAR (Successive Approximation Register) architecture device operates at a 75 kSPS sampling rate with SPI digital interface and external voltage reference configuration. The component is classified as Active product status with full RoHS3 compliance and REACH unaffected designation, making it suitable for current production and procurement cycles. Alternative equivalent parts may be required due to inventory constraints, regional availability, or supply chain optimization.

Substiute Parts

MAX189CEWE+
Analog Devices Inc./Maxim IntegratedIn Stock: 1192MAX189CEWE+ Datasheet
MAX189CEWE+
Current Part
MAX189CEWE+
Analog Devices Inc./Maxim IntegratedIn Stock: 1192MAX189CEWE+ Datasheet
MAX189CEWE+
Direct
MAX189AEWE+
Analog Devices Inc./Maxim IntegratedIn Stock: 1100MAX189AEWE+ Datasheet
MAX189AEWE+
Parametric Equivalent

Key Parameters

Parameter Specification
Resolution 12 Bits
Sampling Rate 75 kSPS
Number of Inputs 1
Input Type Single Ended
Architecture SAR
Data Interface SPI
Reference Type External
Analog Supply Voltage 5V
Digital Supply Voltage 5V
Operating Temperature Range -40°C to 85°C
Package Type 16-SOIC (0.295", 7.50mm Width)
Mounting Type Surface Mount
RoHS Status ROHS3 Compliant
MSL Rating 1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the MAX189CEWE+ is determined by strict equivalence across all critical electrical and mechanical parameters. The following parameters establish the substitution criteria:

  • 12-bit resolution requirement
  • 75 kSPS sampling rate specification
  • Single-ended input configuration with 1 input channel
  • SAR architecture with external reference
  • SPI digital interface protocol
  • 5V analog and digital supply voltage requirements
  • 16-SOIC surface mount package format
  • Operating temperature range of -40°C to 85°C
  • RoHS3 compliance and MSL 1 rating

Parts meeting all these parameters are classified as parametric equivalents and direct substitutes. The MAX189AEWE+ satisfies all specified criteria and is therefore a valid substitute for the MAX189CEWE+.

Parameter Comparison

Parameter MAX189CEWE+ MAX189AEWE+ Equivalence
Resolution (Bits) 12 12 Match
Sampling Rate (kSPS) 75 75 Match
Number of Inputs 1 1 Match
Input Type Single Ended Single Ended Match
Architecture SAR SAR Match
Data Interface SPI SPI Match
Reference Type External External Match
Analog Supply Voltage 5V 5V Match
Digital Supply Voltage 5V 5V Match
Operating Temperature -40°C to 85°C -40°C to 85°C Match
Package / Case 16-SOIC (0.295", 7.50mm Width) 16-SOIC (0.295", 7.50mm Width) Match
Mounting Type Surface Mount Surface Mount Match
RoHS Status ROHS3 Compliant ROHS3 Compliant Match
MSL Rating 1 (Unlimited) 1 (Unlimited) Match

Engineering Selection Recommendations

Both MAX189CEWE+ and MAX189AEWE+ are Active product status components manufactured by Analog Devices Inc./Maxim Integrated. Selection between these parts should be based on availability and procurement requirements. Both parts carry identical RoHS3 compliance certification and REACH unaffected status, confirming regulatory equivalence for current production applications. The MSL 1 rating on both parts indicates unlimited shelf life under standard storage conditions. No technical differentiation exists between these components based on provided specifications; selection is therefore driven by inventory status and supply chain considerations.

Frequently Asked Questions (FAQ)

Q: Can MAX189AEWE+ be used as a direct replacement for MAX189CEWE+ in existing designs?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, pin configuration, package format, and operating characteristics. No design modifications are required for substitution.

Q: Are there any differences in compliance or certification between these parts?

A: No. Both MAX189CEWE+ and MAX189AEWE+ carry identical RoHS3 compliance, REACH unaffected status, and MSL 1 ratings. Regulatory and environmental compliance is equivalent.

Q: What determines whether a part can substitute for the MAX189CEWE+?

A: Substitution eligibility requires matching all critical parameters: 12-bit resolution, 75 kSPS sampling rate, single-ended 1-input configuration, SAR architecture, external reference type, SPI interface, 5V dual supply, 16-SOIC package, -40°C to 85°C operating range, and RoHS3/MSL 1 compliance.

Q: Are there any package or pinout considerations when substituting these parts?

A: No. Both parts use identical 16-SOIC surface mount packaging with 0.295" width (7.50mm). Pinout and PCB footprint compatibility is guaranteed.

Q: How does inventory status affect part selection?

A: Inventory levels may influence procurement decisions. MAX189CEWE+ currently has 1089 pcs in stock, while MAX189AEWE+ has 1043 pcs available. Both quantities support production requirements; selection should align with supply chain and delivery timeline needs.

Request Quote (Ships tomorrow)