MAL213636222E3 Equivalent & Substitute Parts

Part Overview

The MAL213636222E3 is a 2200 µF, 25 V aluminum electrolytic capacitor in radial configuration, manufactured by Vishay Beyschlag/Draloric/BC Components. This through-hole component is rated for 10,000 hours at 105°C and is designed for general purpose applications. The part is currently active in production with 920 pieces available in stock.

Substitute parts are identified when equivalent capacitance and tolerance values are maintained while other electrical or mechanical parameters may differ, such as voltage rating or ripple current capability.

Substiute Parts

MAL213636222E3

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1002MAL213636222E3 Datasheet

Current PartRFQ

MAL215060222E3

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1556MAL215060222E3 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MAL213636222E3 is determined by the following criteria:

• Capacitance value must remain 2200 µF
• Tolerance must remain ±20%
• Voltage rating may be equal to or greater than 25 V
• Operating temperature range must encompass -55°C ~ 105°C
• Polarization must remain polar
• Mounting type must remain through hole
• Physical dimensions (lead spacing, diameter, height) must be identical or compatible with PCB layout
• Package type must remain radial, can configuration

The MAL215060222E3 meets these criteria as a direct substitute with an upgraded voltage rating of 35 V, maintaining all other mechanical and thermal specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the MAL213636222E3 and MAL215060222E3 are active production parts manufactured by Vishay Beyschlag/Draloric/BC Components and maintain ROHS3 compliance. The MAL215060222E3 provides an upgraded voltage rating of 35 V compared to the 25 V rating of the MAL213636222E3, while maintaining identical physical dimensions and thermal characteristics. The substitute part also exhibits lower impedance (19 mOhms versus 25 mOhms) and higher ripple current capability (2.196 A versus 1.656 A at 100 Hz).

Selection between these parts depends on circuit voltage requirements. The MAL215060222E3 is suitable for applications requiring higher voltage margin or operating in circuits with 25 V to 35 V supply specifications. The MAL213636222E3 remains appropriate for circuits with strict 25 V voltage specifications where the lower voltage rating is sufficient.

Frequently Asked Questions (FAQ)

Q: Can the MAL215060222E3 be used in place of the MAL213636222E3?

A: Yes. The MAL215060222E3 is a direct substitute with identical capacitance (2200 µF), tolerance (±20%), physical dimensions, lead spacing, and thermal ratings. The higher voltage rating (35 V versus 25 V) provides additional design margin and does not create compatibility issues in circuits designed for 25 V operation.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both parts share identical lead spacing (0.295" / 7.50mm), diameter (0.630" / 16.00mm), and maximum seated height (1.319" / 34.60mm). PCB layout compatibility is maintained.

Q: What is the difference in ripple current capability?

A: The MAL215060222E3 supports 2.196 A ripple current at 100 Hz, compared to 1.656 A for the MAL213636222E3. This higher ripple current capability in the substitute part results from its higher voltage rating and lower impedance (19 mOhms versus 25 mOhms).

Q: Are both parts RoHS compliant?

A: Yes. Both the MAL213636222E3 and MAL215060222E3 are ROHS3 compliant.

Q: What is the operating temperature range for both parts?

A: Both parts operate across the identical temperature range of -55°C to 105°C with a rated lifetime of 10,000 hours at 105°C.