M3Z24VC Equivalent & Substitute Parts

Part Overview

The M3Z24VC is a 24 V Zener diode manufactured by Taiwan Semiconductor Corporation, designed for surface mount applications in the SOD-323F package. This component operates at 200 mW maximum power dissipation with ±5% voltage tolerance and is classified as Active product status. The M3Z24VC is specified for applications requiring precise voltage regulation and transient suppression across industrial and commercial temperature ranges. Substitute parts are identified based on identical electrical specifications and compatible packaging configurations to support procurement flexibility and supply chain continuity.

Substiute Parts

M3Z24VC

Taiwan Semiconductor CorporationIn Stock: 894M3Z24VC Datasheet

Current PartRFQ

M3Z24VC RRG

Taiwan Semiconductor CorporationIn Stock: 3740M3Z24VC RRG Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the M3Z24VC are identified through parametric equivalence across all critical electrical and mechanical specifications. The substitution logic is based on the following key parameters that must remain identical:

• Zener voltage rating: 24 V nominal
• Voltage tolerance: ±5%
• Maximum power dissipation: 200 mW
• Maximum impedance: 70 Ohms
• Reverse leakage current: 100 nA @ 19 V
• Operating temperature range: -55°C ~ 150°C
• Package type: SOD-323F (SC-90)
• Mounting configuration: Surface Mount
• Regulatory compliance: ROHS3 Compliant, REACH Unaffected

Parts meeting these criteria are classified as parametric equivalents and may be substituted directly in circuit designs without modification to board layout or electrical design parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the M3Z24VC and M3Z24VC RRG are Active status products manufactured by Taiwan Semiconductor Corporation with identical electrical performance specifications. Selection between these parts is determined by packaging and supply requirements rather than electrical characteristics.

The M3Z24VC in Tape & Reel (TR) packaging is suitable for high-volume automated assembly operations requiring continuous reel feed. The M3Z24VC RRG in Cut Tape (CT) and Digi-Reel® packaging accommodates lower-volume production runs, prototype development, and applications requiring flexible component quantities.

Both variants maintain full ROHS3 compliance and REACH Unaffected status, ensuring regulatory compatibility across industrial and commercial applications. The identical electrical specifications, operating temperature range, and package footprint enable direct substitution without circuit redesign or board layout modification.

Frequently Asked Questions (FAQ)

Q: Can M3Z24VC and M3Z24VC RRG be used interchangeably in circuit designs?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, voltage ratings, power ratings, impedance characteristics, and operating temperature ranges. The SOD-323F package footprint is identical, enabling direct substitution without circuit modification.

Q: What is the primary difference between M3Z24VC and M3Z24VC RRG?

A: The primary difference is packaging format. M3Z24VC is supplied in Tape & Reel (TR) configuration for high-volume automated assembly. M3Z24VC RRG is supplied in Cut Tape (CT) and Digi-Reel® format for lower-volume and flexible quantity requirements. Electrical performance is identical.

Q: Are both parts suitable for the same operating temperature range?

A: Yes. Both M3Z24VC and M3Z24VC RRG operate across the identical temperature range of -55°C to 150°C junction temperature, supporting applications across industrial and commercial environments.

Q: Do both parts meet the same regulatory compliance standards?

A: Yes. Both parts are ROHS3 Compliant and REACH Unaffected, with identical ECCN (EAR99) and HTSUS (8541.10.0050) classifications.

Q: Can the M3Z24VC RRG be used in automated pick-and-place assembly?

A: The M3Z24VC RRG in Cut Tape and Digi-Reel® packaging is compatible with standard component feeders used in automated assembly equipment. Verification of feeder compatibility with specific assembly equipment specifications is required.

Q: What is the maximum reverse leakage current specification?

A: Both parts specify 100 nanoamperes maximum reverse leakage current measured at 19 V reverse bias voltage.

Q: Are there inventory differences between the two part numbers?

A: Yes. M3Z24VC (TR) has 878 pieces in stock, while M3Z24VC RRG (CT & Digi-Reel®) has 3689 pieces in stock. Availability should be confirmed with the supplier for specific procurement timelines.