M2S010-1FGG484 Equivalent & Substitute Parts

Part Overview

The M2S010-1FGG484 is an ARM Cortex-M3 System On Chip (SOC) from Microchip Technology's SmartFusion2 product line. This embedded IC integrates a 166MHz processor with 10K logic modules FPGA fabric, 256KB flash memory, and 64KB RAM in a 484-FPBGA package. The device is currently active in production and widely used in applications requiring mixed-signal processing with programmable logic capabilities. Substitute parts are identified when component availability is constrained or when procurement from alternative inventory sources is necessary while maintaining full electrical and mechanical compatibility.

Substiute Parts

M2S010-1FGG484

Microchip TechnologyIn Stock: 889M2S010-1FGG484 Datasheet

Current PartRFQ

M2S010-FGG484

Microchip TechnologyIn Stock: 3435M2S010-FGG484 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the M2S010-1FGG484 is limited to parts that maintain identical electrical specifications and mechanical compatibility. The substitute relationship is based on the following critical parameters:

• Identical base product number (M2S010)
• Identical core processor architecture (ARM Cortex-M3)
• Identical operating frequency (166MHz)
• Identical memory configuration (256KB flash, 64KB RAM)
• Identical FPGA logic module count (10K)
• Identical package type and pin count (484-FPBGA, 23x23)
• Identical I/O count (233)
• Identical operating temperature range (0°C to 85°C)
• Identical compliance certifications (ROHS3, REACH Unaffected)

Only parts meeting all these criteria are considered direct parametric equivalents.

Parameter Comparison

Engineering Selection Recommendations

The M2S010-FGG484 is a direct parametric equivalent to the M2S010-1FGG484. Both parts are manufactured by Microchip Technology, maintain identical electrical and mechanical specifications, and carry the same compliance certifications (ROHS3 Compliant, REACH Unaffected). Selection between these parts should be based on procurement availability and inventory status. Both parts are active products suitable for new designs and production applications.

Frequently Asked Questions (FAQ)

Q: What is the difference between M2S010-1FGG484 and M2S010-FGG484?

A: These parts are parametric equivalents with identical electrical specifications, memory configuration, processor speed, FPGA logic capacity, and package type. The difference in part number designation does not reflect functional or performance differences.

Q: Can M2S010-FGG484 be used as a direct replacement for M2S010-1FGG484?

A: Yes. Both parts share identical core processor architecture, clock speed, memory sizes, I/O count, package dimensions, and thermal specifications. No design modifications are required for substitution.

Q: Are there any package or pinout differences between these parts?

A: No. Both parts use the 484-FPBGA (23x23) package with 233 I/O pins. Pinout and mechanical compatibility are identical.

Q: Do both parts meet the same compliance requirements?

A: Yes. Both M2S010-1FGG484 and M2S010-FGG484 are ROHS3 Compliant and REACH Unaffected, with identical MSL ratings of 3 (168 Hours).

Q: Which part should be selected for new designs?

A: Either part is suitable for new designs. Selection should be based on current inventory availability and procurement lead times. Both parts carry active product status from Microchip Technology.