M2S005-VF400 Equivalent & Substitute Parts

Part Overview

The M2S005-VF400 is an ARM Cortex-M3 System On Chip (SOC) from Microchip Technology's SmartFusion2 product line. This embedded IC integrates a 166MHz processor with 5K logic modules FPGA fabric, 128KB flash memory, and 64KB RAM in a 400-VFBGA package. The device supports multiple connectivity protocols including CANbus, Ethernet, I2C, SPI, UART/USART, and USB, making it suitable for mixed-signal embedded applications requiring both microcontroller and programmable logic functionality.

The M2S005-VF400 is currently in active production status. Identifying equivalent substitute parts becomes necessary when managing supply chain continuity, addressing component availability constraints, or evaluating compliance requirements across different manufacturing batches or procurement channels.

Substiute Parts

M2S005-VF400

Microchip TechnologyIn Stock: 1076M2S005-VF400 Datasheet

Current PartRFQ

M2S005-VFG400

Microchip TechnologyIn Stock: 977M2S005-VFG400 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the M2S005-VF400 is determined by strict equivalence across the following critical parameters:

• Identical core processor architecture (ARM Cortex-M3)
• Matching processor speed (166MHz)
• Identical memory configuration (128KB flash, 64KB RAM)
• Equivalent FPGA logic capacity (5K logic modules)
• Same package type and pin count (400-VFBGA with 169 I/O)
• Identical operating temperature range (0°C ~ 85°C)
• Matching peripheral and connectivity feature set

The M2S005-VFG400 meets all substitution criteria as a parametric equivalent within the SmartFusion2 series, maintaining full functional and electrical compatibility with the M2S005-VF400.

Parameter Comparison

Engineering Selection Recommendations

Both the M2S005-VF400 and M2S005-VFG400 are functionally equivalent and maintain active product status from Microchip Technology. Selection between these parts should be based on regulatory and compliance requirements specific to the application.

The M2S005-VF400 is RoHS non-compliant, suitable for applications without RoHS restrictions or legacy systems where RoHS compliance is not mandated.

The M2S005-VFG400 is ROHS3 compliant, required for applications subject to RoHS Directive 2011/65/EU or equivalent regional regulations. This variant is the appropriate choice for consumer electronics, industrial equipment sold in regulated markets, and applications requiring documented RoHS compliance.

Both parts share identical REACH status (REACH Unaffected) and carry the same ECCN and HTSUS classifications, indicating equivalent export control and tariff treatment.

Frequently Asked Questions (FAQ)

Q: Can M2S005-VFG400 replace M2S005-VF400 in existing designs?

A: Yes. The M2S005-VFG400 is a parametric equivalent with identical electrical specifications, processor architecture, memory configuration, package type, and I/O count. Direct substitution is supported without design modifications.

Q: What is the difference between M2S005-VF400 and M2S005-VFG400?

A: The primary difference is RoHS compliance status. The M2S005-VF400 is RoHS non-compliant, while the M2S005-VFG400 is ROHS3 compliant. All other electrical and mechanical parameters are identical.

Q: Which part should I select for a new design?

A: If your application or market requires RoHS compliance, select M2S005-VFG400. If RoHS compliance is not a requirement, either part is functionally suitable. Verify compliance requirements with your regulatory or procurement department.

Q: Are the packages physically identical?

A: Yes. Both parts use the 400-VFBGA (17x17) package with 169 I/O pins. PCB footprints and land patterns are identical.

Q: Can I mix these parts in the same production batch?

A: Both parts are functionally equivalent and can be used interchangeably from an electrical standpoint. However, mixing parts with different RoHS compliance statuses in the same production batch may create documentation and traceability complications. Verify your quality and compliance procedures before mixing.

Q: What is the MSL rating for both parts?

A: Both the M2S005-VF400 and M2S005-VFG400 carry MSL 3 (168 Hours) moisture sensitivity level, requiring identical handling and storage protocols.